Arm® Cortex® A55 based on i.MX 91xx
Embedded Module TQMa91xxLA Embedded Cortex®-A55 Module based on i.MX 91xx
Arm® Cortex® A55 based on i.MX 91xx
- High-speed communication via 2x Gbit Ethernet (1x TSN), 2x USB 2.0 interface
- Low power consumption (typ. 2W)
- Integrated security functions
- Advanced Secure Element SE050
- Gyroscope sensor
CPU/Processor data
- Cortex®-A55 - Up to 1,4 GHz
- i.MX 9131, i.MX 9121
Memory
- Up to 2 GB
- Up to 256 MB
- Up to 256 GB
- 0/64-kbit
Graphics
- LCD interface: 1x 24 Bit RGB
Communication interfaces
- Up to 2x Gbit-Ethernet (1x TSN)
- Up to 2x USB 2.0
- Up to 2x CAN FD
- Up to 8x UART
Other interfaces
- Up to 3x SDIO / eMMC
- Up to 8x I²C
- Up to 8x SPI
- Up to 1x QSPI
- Up to 7x I²S
- Up to 8x PDM Mic.
- Up to 1x SPDIF
- JTAG
Other functions
- Real Time Clock (RTC)
- SE050 (optional)
- Temperature sensor
- Gyroscope sensor
General data/basic data
- 38 x 38 mm
- Standard temperature range: -25°C…+85°C
- Extended temperature range: -40°C...+85°C
- LGA (Land Grid Array) 281 pins
- 5 V
OS-Support
- Linux
- Free RTOS
Download Subscription
TQMa9131LA-AA (Prototypes Q1/2024)
TQMa9131LA-AA, Single Cortex®-A55/1,4 GHz, 8 GB eMMC Flash, 1GB LPDDR4, 64 kB EEPROM, RTC, -25°C...+85°C
TQMa9121LA-AA
TQMa9121LA-AA, Single Cortex®-A55/800MHz, 8 GB eMMC Flash, 1GB LPDDR4, 64 kB EEPROM, RTC, -25°C...+85°C
STKa91xxLA-AA
STKa9131CA (Eval Kit) with TQMa9131LA or TQMa9131CA, Single Cortex A55/1,4 GHz, 1 GBLPDDR4, 8 GB eMMC Flash, 64MB NOR Flash, 64 kB EEPROM, RTC, 2x USB 2.0 HOST, 1x USB Type C, 2x ETH 10/100/1000, 1x CAN FD, 1x RS485, 1x 24Bit RGB, 1x LVDS, 1x MiniPCIe + SIM Card (USB only), WLAN, Temperature sensor, Reset-Button, Micro SD-Card, Accessory kit with Power Supply, SD card, Cables and Connectors
Starterkit STKa91xxLA set
The core of the STKa9xxLA set is the TQMa93xxLA module with a Single Cortex®-A55 CPU. The components contained in the starter kit constitute a modular system enabling you to develop your own product ideas. Development of graphic interfaces can be started immediately using the prepared combination of closed display unit and starter kit that are matched to each other. To develop your own hardware you can use the certified and qualified circuit components of the starter kit in your own designs.
