Embedded Module TQMa57xxEmbedded Cortex®-A15 module based on AM57xx for applications with real-time requirements.

Arm® Cortex®-A15 based on AM57xx

  • Graphics (with HD support)
  • High-speed communication with up to 2xGbE,4x real-time Ethernet 10/100-Base, 2xPCIe, 1x USB3.0,1x USB 2.0 OTG with CAN-FD support
  • Low power consumption (typ.4W)
  • Integrated 2x Cortex M4
  • IEEE 1588 Hardware Support
  • Security Functions
The Minimodule TQMa57xx is based on the Arm® Cortex®-A15 core technology. The integrated high performance graphics controller supports applications with display and touch screen requirements. For various applications such as networking, industrial automation and controls with requirements for fast and secure data processing, there are two CPU variants available.
With a Single-/Dual-Core Arm® Cortex®-A15 core and a clock rate up to 2x 1,5 GHz the module provides a balanced ratio between high performance and power dissipation.

CPU/Processor data

  • Cortex®-A15 Technology
  • AM571x
  • AM572x
  • AM574x
  • CPU JTAG interface


  • 0/64-kbit
  • Up to 32 GB
  • Up to 256 MB
  • Up to 4 GB
  • ECC protection (optional)


  • LCD Interface (24-bit RGB)
  • HDMI-Interface

Communication interfaces

  • Up to 2x CAN 2.0 B
  • Up to 2x Ethernet 10/100/1000 Mbit
  • Up to 4x Ethernet 10/100 (PRU)
  • 1x USB 2.0 high-speed OTG interface
  • Up to 1x USB 3.0 high speed Host
Serial Ports:
  • Up to 10x UART

Other interfaces

  • Up to 4x SPI
  • Up to 4x I2S
  • Up to 1x SATA 3.0
  • Up to 2x PCIe
  • Up to 3x I2C
SD Card:
  • Up to 2x SDIO/MMC
  • Camera sensor interface (2x 24b/2x 8b)

Other functions

  • Real Time Clock (RTC)

General data/basic data

Power supply:
  • 5 V
Temperature range:
  • Standard temperature range: -25°C…+85°C
  • Extended temperature: -40°C…+85°C
  • 75 x 55 mm
Plug-in System:
  • Board-to-board plug-in system 400 pins
  • Temperature sensor


OS Support:
  • Linux
  • VxWorks on request
  • QNX on request
  • Android on request

User Manual TQMa57xx (2 MB, pdf)

User Manual MBa57xx (3 MB, pdf)


AM5718/1,5GHz, 8GB eMMC-Flash, 1GB DDR3L-SDRAM, 64kB EEPROM, RTC, -25°C…+85°C


AM5728/1,5 GHz, 8GB eMMC-Flash, 2GB DDR3L, 64kB EEPROM, RTC, -25°C…+85°C


AM5748/1,5GHz, 8GB eMMC-Flash, 2GB DDR3L-SDRAM, 64kB EEPROM, RTC, -25°C…+85°C

Other configurations on request


STKa57xx (Eval Kit) with TQMa574x-AA, Dual Cortex®-A15/1,5 GHz, 1 GB DDR3L, 8 GB eMMC Flash, 64 kB EEPROM, 1x RS232, 1x RS485, 1x CAN 2.0 B, 1x CAN-FD, 3x USB 3.0 HOST, 1x USB 2.0 OTG, 2x GbE, 2x PRU-ETH, LCD Port, 1x HDMI, LVDS, 2x PCIe, RTC, Temperature sensor, Reset button, SD-Card interface, Audio, Power Supply, 4 GB SD card, Cables

Starterkit STKa57xx set

The core of the STKa57xx set is the TQMa57xx module with a Single/Dual Cortex®-A15 CPU. The components contained in the starter kit constitute a modular system enabling you to develop your own product ideas. Development of graphic interfaces can be started immediately using the prepared combination of closed display unit and starter kit that are matched to each other. To develop your own hardware you can use the certified and qualified circuit components of the starter kit in your own designs.

Application examples


Our USPs

  • Unbeatable long-term availability
  • Robustness for all applications
  • The most comprehensive range of modules on the market
  • A comprehensive design and support of an E²MS manufacturer
  • Full design freedom, as all processor functions are fully accessible
  • x86 for tough industrial use

Embedded downloads

Current downloads such as product data sheets, manuals, application notes as well as software and drivers can be found in the Download Center.


Support Wiki

Comprehensive information from the software area such as sample codes, tips and tricks, application notes, FAQs and BSP documentation are available in our Support Wiki.


This website uses cookies to improve the usability of our website, to analyze web visits and to personalize content.