Easy installation thanks to clip-on electronics.
PO100 Smart power adapter for the DM100 system.
Easy installation thanks to clip-on electronics.
- Smart power adapter (e.g. for up to seven MIO100 and one CU100)
- 5TE
- max. 115 VA power consumption
- monitoring internal BUS system
- fast integration with ready-made software modules (Easy Connect)
EASY INSTALLATION THANKS TO PLUG-AND-PLAY ELECTRONICS
The module has two parts; the lower half is the terminal module. It
contains all the plugs you need to connect the wires and fieldbuses.
All the electronics are in the top half. This two-part construction
gives users a number of advantages. The electronics half can be
plugged into the terminal module in a subsequent, separate step.
And you don’t have to undo any wiring if you need to repair or
exchange a component.
The module has two parts; the lower half is the terminal module. It
contains all the plugs you need to connect the wires and fieldbuses.
All the electronics are in the top half. This two-part construction
gives users a number of advantages. The electronics half can be
plugged into the terminal module in a subsequent, separate step.
And you don’t have to undo any wiring if you need to repair or
exchange a component.
Initial installation in the wiring cabinet is
also more convenient, because you have more space to work with.
Electronics modules can be tested from an office space when all the
terminal modules are installed.
All terminal models are interconnected by means of the CAB bus.
Thanks to the jumpers, this takes place automatically when you
attach it to the top-hat rail. The modules can also be addressed fully
automatically; no additional configuration is required.
also more convenient, because you have more space to work with.
Electronics modules can be tested from an office space when all the
terminal modules are installed.
All terminal models are interconnected by means of the CAB bus.
Thanks to the jumpers, this takes place automatically when you
attach it to the top-hat rail. The modules can also be addressed fully
automatically; no additional configuration is required.
Operating conditions
Ambient temperature:
- 0°C...+50°C (in operation); -25°C...+60°C (storage temperature)
Elektrical data
Power supply:
- 120...240 V AC
Power consumption
Power consumption:
- max. 115 VA
Mechanical data
Case shape:
- REG (according to DIN 43880)
Case width:
- 5 TE
Protection class/type:
- IP20