Easy installation
Seamless integration into your system
MU103
Metering unit for precise direct measurement at the grid connection point, Direct measurement for submetering and energy management to the highest standards.
!NEW!
The MU103 is a compact, high-performance metering unit for direct measurement of energy flows at the grid connection point (NAP). Developed for applications in the smart home, commercial and industrial sectors, it provides precise measurement data for consumption and feed-in - the basis for efficient energy management in accordance with ISO 50001.
Thanks to its flexible connectivity and secure communication design, the MU103 is ideally suited for integration into home energy management systems (HEMS) - whether as a stand-alone gateway or embedded in systems such as inverters.
The advantages of the MU103
Areas of application for the MU103
- Direct measurement for smart homes and small commercial enterprises
- Submetering for energy flow analysis
- Data acquisition for HEMS systems
- Energy optimization at the grid connection point
- OEM integration in energy management solutions
Functions and Highlights
Direct measurement up to 63 A (3-phase)
For supply and feed-in - without external sensors
Precise 4-quadrant meter
Measurement of active power, reactive power and energy flows
Versatile connectivity
Modbus RTU/TCP/TLS, Sunspec, MQTT (roadmap), RS-485, LAN, WLAN (plan)
Simple web configuration
via HTTPS, with role rights and encrypted communication
OTA updates & mDNS support
Central administration and simple integration
Cybersecurity
CRA-ready, developed in accordance with DIN EN IEC 62443-4-2
OEM-capable & customizable
Three product variants: R / LR / LR+, customer-specific adaptations
Compact & efficient
Only 4 HP wide, < 2 W power consumption
Security and future-proof
The MU103 meets the highest cybersecurity requirements and is already prepared for the requirements of the Cyber Resilience Act (CRA). Thanks to OTA update capability, encrypted protocols and role-based web access, the MU103 offers maximum data security - even in sensitive applications.
Made in Germany - with the TQ factor
As part of the TQ Group, the MU103 is manufactured entirely in Germany - fully automated, scalable and to industrial quality standards. This means you benefit from a reliable supply chain, short distances, direct communication and an experienced development partner with over 1 million energy measurement systems delivered.
Downloads MU103
Lizenzinformation
MU100 v1.0.0
Open Source Software
====================
The product contains Open Source software programs and firmware (including Proprietary Software or Open Source Software) which are protected by copyrights.
You are entitled to use the Open Source software in accordance with the applicable Open Source software license conditions. If there is any conflict between the Open Source software license conditions and the license conditions applicable to the product, the Open Source software license conditions shall take precedence in relation to the Open Source software.
We, TQ-Systems GmbH, are liable for the product including the Open Source software and firmware (including Proprietary Software or Open Source Software) it contains in accordance with the license conditions applicable to the product. This excludes any liability for use of the Open Source software that goes beyond the program sequence intended by us for the product and also excludes any liability for defects that are caused by changes by third parties made to the Open Source software, for example, after delivery by TQ-Systems.
This product contains software which is licensed by TQ Systems under the TQ-Systems Software License Version 1.0.4.
For the Open Source components, the liability exclusions of the rights holders applies in the respective license texts.
We reserve the right to refuse providing technical support for the product if it has been modified by third parties.
Open Source Software Contained in this Product/Device:
======================================================
* FreeRTOS-Kernel V11.1.0 (MU100)
* tq MU100 internal protocol v1.0.0
* tq MU100 MCU Application v1.0.0
* tq MU100 MCU Bootloader v1.0.0
* tq MU100 MCU Common v1.0.0
* tq MU100 MCU Framework v1.0.0
* tq MU100 Metering Application v1.0.0
* tq MU100 Metering Bootloader v1.0.0
* tq MU100 Web Frontend v1.0.0
Details
========
Licenses for FreeRTOS-Kernel V11.1.0 (MU100)
--------
* MIT (13)
Copyright Notices for FreeRTOS-Kernel V11.1.0 (MU100)
-----------------
Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
Licenses for tq MU100 internal protocol v1.0.0
--------
* TQSSLAv1.0.4 (22)
Copyright Notices for tq MU100 internal protocol v1.0.0
-----------------
Copyright (c) 2018-2024 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved.
Copyright (c) 2021-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Michael Bernhardt and the MU100/SU100 development team
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved.
Licenses for tq MU100 MCU Application v1.0.0
--------
* Apache-2.0 (2)
* BSD-3-Clause (7)
* TQ ORYX End User License Agreement(8)
* MIT (14)
* ST Micro SLA0044v5 (18)
* TQSSLAv1.0.4 (25)
Copyright Notices for tq MU100 MCU Application v1.0.0
-----------------
Copyright (c) 2024 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Robert Kanzur
Copyright (c) 2020 Arm Limited. All rights reserved.
Copyright (c) 2018-2022 Arm Limited. All rights reserved.
Copyright (c) 2024 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Sven Neumann
Copyright (c) 2009-2022 ARM Limited. All rights reserved.
Copyright (c) 2021 STMicroelectronics. All rights reserved.
Copyright (c) 2024-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Oswald Marcus and the MU100/SU100 development team
Copyright (c) 2018-2022 Arm China. All rights reserved.
Copyright (c) 2024, TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Leonhard Römer
Copyright (c) 2009-2020 Arm Limited. All rights reserved.
Copyright (c) 2020-2021 Arm Limited. All rights reserved.
Copyright (c) 2009-2018 Arm Limited. All rights reserved.
Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Robert Kanzur and the MU100/SU100 development team
Copyright (c) 2021, TQ-Systems GmbH, D-82229 Seefeld, Germany. All rights reserved. author David Tondorf author Stefan Giggenbach
Copyright (C) 2010-2025 Oryx Embedded SARL. All rights reserved.
Copyright (c) 2009-2017 Dave Gamble and cJSON contributors
Copyright (c) 2025 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Leonhard Römer
Copyright (c) 2017-2021 Arm Limited. All rights reserved.
Copyright (c) 2018-2021 Arm Limited. All rights reserved.
Copyright (c) 2006-2018 Christian Walter <cwalter@embedded-solutions.at> All rights reserved.
Copyright (c) 2024-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Römer Leonhard
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Sven Neumann and the MU100/SU100 development team
Copyright (c) 2024, TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Michael Bernhardt
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved.
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Maximilian Kürth and the MU100/SU100 development team
Copyright (c) 2024-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Sven Neumann and the MU100/SU100 development team
Copyright (c) 2009-2019 Arm Limited. All rights reserved.
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Römer Leonhard and the MU100/SU100 development team
Copyright (c) 2009-2018 Arm Limited.
Copyright (c) 2023 STMicroelectronics. All rights reserved.
Copyright (c) 2022 Arm Limited. All rights reserved.
Copyright (c) 2021, TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Robert Kanzur
Copyright (c) 2024 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Leonhard Römer
Copyright (c) 2017-2020 Arm Limited. All rights reserved.
Copyright (c) 2017-2018 Arm Limited. All rights reserved.
Copyright (c) 2024-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Michael Bernhardt and the MU100/SU100 development team
Copyright (c) 2020-2024 STMicroelectronics. All rights reserved.
Copyright (c) 2017-2021 IAR Systems
Copyright (c) 2024-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Römer Leonhard and the MU100/SU100 development team
Copyright (c) 2024-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Marcus Oswald and the MU100/SU100 development team
Copyright (c) 2024 STMicroelectronics. All rights reserved.
Copyright (c) 2024-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Robert Kanzur and the MU100/SU100 development team
Copyright (c) 2024 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Michael Bernhardt
Copyright (c) 2009-2021 Arm Limited. All rights reserved.
Licenses for tq MU100 MCU Bootloader v1.0.0
--------
* Apache-2.0 (1)
* BSD-3-Clause (6)
* TQ ORYX End User License Agreement(9)
* ST Micro SLA0044v5 (17)
* TQSSLAv1.0.4 (20)
Copyright Notices for tq MU100 MCU Bootloader v1.0.0
-----------------
Copyright (c) 2020 Arm Limited. All rights reserved.
Copyright (c) 2018-2022 Arm Limited. All rights reserved.
Copyright (c) 2009-2022 ARM Limited. All rights reserved.
Copyright (c) 2021 STMicroelectronics. All rights reserved.
Copyright (c) 2018-2022 Arm China. All rights reserved.
Copyright (c) 2024, TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Leonhard Römer
Copyright (c) 2009-2020 Arm Limited. All rights reserved.
Copyright (c) 2020-2021 Arm Limited. All rights reserved.
Copyright (c) 2009-2018 Arm Limited. All rights reserved.
Copyright (C) 2010-2025 Oryx Embedded SARL. All rights reserved.
Copyright (c) 2017-2021 Arm Limited. All rights reserved.
Copyright (c) 2021, TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Leonhard Römer
Copyright (c) 2018-2021 Arm Limited. All rights reserved.
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved.
Copyright (c) 2009-2019 Arm Limited. All rights reserved.
Copyright (c) 2009-2018 Arm Limited.
Copyright (c) 2023 STMicroelectronics. All rights reserved.
Copyright (c) 2022 Arm Limited. All rights reserved.
Copyright (c) 2021, TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Robert Kanzur
Copyright (c) 2017-2020 Arm Limited. All rights reserved.
Copyright (c) 2017-2018 Arm Limited. All rights reserved.
Copyright (c) 2020-2024 STMicroelectronics. All rights reserved.
Copyright (c) 2017-2021 IAR Systems
Copyright (c) 2024-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Römer Leonhard and the MU100/SU100 development team
Copyright (c) 2024 STMicroelectronics. All rights reserved.
Copyright (c) 2024, TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Robert Kanzur
Copyright (c) 2009-2021 Arm Limited. All rights reserved.
Licenses for tq MU100 MCU Common v1.0.0
--------
* TQSSLAv1.0.4 (23)
Copyright Notices for tq MU100 MCU Common v1.0.0
-----------------
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Maximilian Kürth
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved.
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Maximilian Kürth and the MU100/SU100 development team
Licenses for tq MU100 MCU Framework v1.0.0
--------
* TQSSLAv1.0.4 (24)
Copyright Notices for tq MU100 MCU Framework v1.0.0
-----------------
Copyright (c) 2022-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author David Tondorf
Copyright (c) 2019-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Stefan Giggenbach, Manuel Windscheid
Copyright (c) 2012-2022 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Dirk Zenker, David Tondorf, Stefan Giggenbach
Copyright (c) 2019-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author David Tondorf author Manuel Windscheid
Copyright (c) 2020-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Dirk Zenker, Stefan Giggenbach, Konstantin Schübert
Copyright (c) 2021-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author David Tondorf
Copyright (c) 2019-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author David Tondorf, Stefan Giggenbach
Copyright (c) 2021-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author David Tondorf, Stefan Giggenbach
Copyright (c) 2020-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Stefan Giggenbach
Copyright (c) 2022-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author David Tondorf, Stefan Giggenbach
Copyright (c) 2020-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Dirk Zenker, David Tondorf, Stefan Giggenbach, Manuel Windscheid, Robert Bärtl
Copyright (c) 2024 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Leonhard Römer
Copyright (c) 2021-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Dirk Zenker, Stefan Giggenbach
Copyright (c) 2020-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Dirk Zenker, Stefan Giggenbach
Copyright (c) 2012-2022 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Stefan Giggenbach
Copyright (c) 2019-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author David Tondorf, Manuel Windscheid
Copyright (c) 2021-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Stefan Giggenbach
Copyright (c) 2019-2023 TQ-Systems GmbH license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Stefan Giggenbach
Licenses for tq MU100 Metering Application v1.0.0
--------
* Silergy & TQ LA 2022-01-27 (16)
* TQSSLAv1.0.4 (21)
Copyright Notices for tq MU100 Metering Application v1.0.0
-----------------
Copyright (C) 2013 Silergy Corp. All Rights Reserved.
Copyright (c) 2022 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. author Michael Bernhardt
Copyright (C) 2016 Silergy Corp. All Rights Reserved.
Copyright 2013, Silergy Corp. All rights reserved.
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved.
Copyright (C) 2021 Silergy Corp. All Rights Reserved.
Copyright (c) 2022-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Michael Bernhardt and the MU100/SU100 development team
Copyright (c) 2007, 2008 Rowley Associates Limited
Copyright 2014, Silergy Corp. All rights reserved.
Licenses for tq MU100 Metering Bootloader v1.0.0
--------
* Silergy & TQ LA 2022-01-27 (16)
* TQSSLAv1.0.4 (21)
Copyright Notices for tq MU100 Metering Bootloader v1.0.0
-----------------
Copyright (C) 2013 Silergy Corp. All Rights Reserved.
Copyright (c) 2022 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. author Michael Bernhardt
Copyright (C) 2016 Silergy Corp. All Rights Reserved.
Copyright 2013, Silergy Corp. All rights reserved.
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved.
Copyright (C) 2021 Silergy Corp. All Rights Reserved.
Copyright (c) 2022-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Michael Bernhardt and the MU100/SU100 development team
Copyright (c) 2007, 2008 Rowley Associates Limited
Copyright 2014, Silergy Corp. All rights reserved.
Licenses for tq MU100 Web Frontend v1.0.0
--------
* Apache-2.0 (3)
* BlueOak-1.0.0 (4)
* BSD-2-Clause (5)
* CC0-1.0 (10)
* ISC (11)
* ISC-Style (12)
* MIT (15)
* TQSSLAv1.0.4 (19)
Copyright Notices for tq MU100 Web Frontend v1.0.0
-----------------
Copyright (c) 2024-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Wegmann Daniel and the MU100/SU100 development team
Copyright (c) 2014 Douglas Christopher Wilson <doug@somethingdoug.com>
Copyright (c) Felix Böhm All rights reserved.
Copyright 2014–present Olivier Lalonde <olalonde@gmail.com>, James Talmage <james@talmage.io>, Ruben Verborgh
Copyright 2018 Rich Harris
Copyright (c) 2011 Einar Otto Stangvik <einaros@gmail.com>
Copyright (c) 2015, David Bonnet <david@bonnet.cc>
Copyright 2019 Justin Ridgewell <jridgewell@google.com>
Copyright Mathias Bynens <https://mathiasbynens.be/>
Copyright (c) 2021-present dominikg and [contributors](https://github.com/dominikg/tsconfck/graphs/contributors)
Copyright (c) 2015-present, Jon Schlinkert.
Copyright jQuery Foundation and other contributors <https://jquery.org/>
Copyright (c) 2015, Glen Maddern
Copyright Eemeli Aro <eemeli@gmail.com>
Copyright (c) Bogdan Chadkin <trysound@yandex.ru>
Copyright (c) 2015-2020, Matteo Collina <matteo.collina@gmail.com>
Copyright (c) 2021 Alexey Raspopov, Kostiantyn Denysov, Anton Verinov
Copyright (c) 2015 Jason Miller
Copyright Michael Ciniawsky <michael.ciniawsky@gmail.com>
Copyright (c) Isaac Z. Schlueter and Contributors
Copyright (c) 2014-2017 TJ Holowaychuk <tj@vision-media.ca>
Copyright 2018 Glen Maddern
Copyright (c) 2014-2017, Jon Schlinkert.
Copyright (c) 2019 RollupJS Plugin Contributors (https://github.com/rollup/plugins/graphs/contributors)
Copyright (c) 2013 James Halliday (mail@substack.net)
Copyright (c) 2012-2019 Thorsten Lorenz, Paul Miller (https://paulmillr.com)
Copyright (c) 2016 Luigi Pinca and contributors
Copyright (c) 2014 Arnout Kazemier
Copyright (c) 2011-2014 TJ Holowaychuk
Copyright (c) 2020-present, Yuxi (Evan) You
Copyright (c) 2012-2013 TJ Holowaychuk
Copyright (c) 2018 Made With MOXY Lda <hello@moxy.studio>
Copyright (c) 2014 Jonathan Ong <me@jongleberry.com>
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author Robert Kanzur and the MU100/SU100 development team
Copyright (c) 2016 Zeit, Inc.
Copyright (c) EGOIST <0x142857@gmail.com> (https://github.com/egoist)
Copyright (c) 2014-2020 Teambition
Copyright (c) 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Simon Lydell
Copyright (c) 2017-2023 npm, Inc., Isaac Z. Schlueter, and Contributors
Copyright 2015-present Alexander Madyankin <alexander@madyankin.name>
Copyright (c) 2015 Unshift.io, Arnout Kazemier, the Contributors.
Copyright (c) 2012-2019 Paul Miller (https://paulmillr.com), Elan Shanker
Copyright 2022 Justin Ridgewell <jridgewell@google.com>
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved.
Copyright (c) 2014 Jonathan Ong me@jongleberry.com
Copyright (c) 2015-present Jason Miller
Copyright (c) 2015, 2019 Elan Shanker
Copyright (c) 2016, Scott Motte All rights reserved.
Copyright (c) 2015 Douglas Christopher Wilson <doug@somethingdoug.com>
Copyright (c) 2015 Alexey Litvinov
Copyright (c) 2013 Julian Gruber <julian@juliangruber.com>
Copyright (c) 2014-2017 Douglas Christopher Wilson
Copyright (c) 2010-2023 Isaac Z. Schlueter and Contributors
Copyright 2013 Thorsten Lorenz. All rights reserved.
Copyright (c) 2019 Elan Shanker, Paul Miller (https://paulmillr.com)
Copyright JS Foundation and other contributors
Copyright (c) 2019-present, VoidZero Inc. and Vite contributors
Copyright 2022 Justin Ridgewell <justin@ridgewell.name>
Copyright (c) 2019 Sindre Sorhus <sindresorhus@gmail.com> (https://sindresorhus.com), Paul Miller (https://paulmillr.com)
Copyright (c) 2014 Nathan Rajlich <nathan@tootallnate.net>
Copyright (c) 2015 Douglas Christopher Wilson
Copyright (c) 2014-present, Jon Schlinkert.
Copyright (c) 2014-2016 Douglas Christopher Wilson
Copyright (c) 2010-2016 Charlie Robbins, Jarrett Cruger & the Contributors.
Copyright 2015 Mark Dalgleish <mark.john.dalgleish@gmail.com>
Copyright (c) 2019 Rich Harris
Copyright (c) 2015 Rich Harris
Copyright (c) 2013-2019 Ivan Nikulin (ifaaan@gmail.com, github.com/inikulin)
Copyright (c) 2009-2023 Isaac Z. Schlueter and Contributors
Copyright (c) 2017-present, Jon Schlinkert.
Copyright (c) 2014 Maxime Thirouin, Jason Campbell & Kevin Mårtensson
Copyright (c) 2015-20 [these people](https://github.com/Rich-Harris/estree-walker/graphs/contributors)
Copyright (c) 2016 Douglas Christopher Wilson <doug@somethingdoug.com>
Copyright (c) 2015 Andreas Lubbe
Copyright (c) 2013-2017 Jared Hanson
Copyright (c) 2011-2023 Isaac Z. Schlueter and Contributors
Copyright (c) 2015, Scott Motte All rights reserved.
Copyright (c) 2013 Troy Goode <troygoode@gmail.com>
Copyright (c) 2010 Sencha Inc.
Copyright 2015 Glen Maddern
Copyright (c) 2022 Anton Kastritskiy
Copyright (c) Feross Aboukhadijeh
Copyright (c) 2014-2016, Jon Schlinkert
Copyright 2016 Bogdan Chadkin <trysound@yandex.ru>
Copyright (c) Ben Briggs <beneb.info@gmail.com> (http://beneb.info)
Copyright (c) Kevin Mårtensson <kevinmartensson@gmail.com> (github.com/kevva)
copyright Jeremy Ashkenas, DocumentCloud and Investigative Reporters & Editors <http://underscorejs.org/>
Copyright (c) 2017-present, Yuxi (Evan) You
Copyright (c) 2015 Tiancheng "Timothy" Gu
Copyright (c) Denis Malinochkin
Copyright (c) 2022 Anthony Fu <https://github.com/antfu>
Copyright (c) 2023-present, sapphi-red
Copyright (c) Luke Edwards <luke.edwards05@gmail.com> (https://lukeed.com)
Copyright (c) 2024-2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author bruestlej and the MU100/SU100 development team
Copyright (c) 2013 Arnout Kazemier and contributors
Copyright (c) 2018-2021 Josh Junon
Copyright (c) Sindre Sorhus <sindresorhus@gmail.com> (https://sindresorhus.com)
Copyright (c) 2015 Matteo Collina
Copyright (c) 2011 LearnBoost
Copyright (c) 2025 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany. All rights reserved. author bruestlej and the MU100/SU100 development team
Copyright (c) Pooya Parsa <pooya@pi0.io>
Copyright (c) 2014-2018, Jon Schlinkert.
Copyright (c) 2014-2017 Douglas Christopher Wilson <doug@somethingdoug.com>
Copyright (c) 2016 Douglas Christopher Wilson
Copyright (C) 2018-2022 Guy Bedford
Copyright (c) 2013 Jonathan Ong <me@jongleberry.com>
Open Source Software Licenses
=============================
(1) Apache-2.0
Apache License
Version 2.0, January 2004
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:
(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives.
Copyright [yyyy] [name of copyright owner]
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
(2) Apache-2.0
Apache License
Version 2.0, January 2004
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:
(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives.
Copyright [yyyy] [name of copyright owner]
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
(3) Apache-2.0
Apache License
Version 2.0, January 2004
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:
(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives.
Copyright [yyyy] [name of copyright owner]
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
(4) BlueOak-1.0.0
# Blue Oak Model License
Version 1.0.0
## Purpose
This license gives everyone as much permission to work with
this software as possible, while protecting contributors
from liability.
## Acceptance
In order to receive this license, you must agree to its
rules. The rules of this license are both obligations
under that agreement and conditions to your license.
You must not do anything with this software that triggers
a rule that you cannot or will not follow.
## Copyright
Each contributor licenses you to do everything with this
software that would otherwise infringe that contributor's
copyright in it.
## Notices
You must ensure that everyone who gets a copy of
any part of this software from you, with or without
changes, also gets the text of this license or a link to
<https://blueoakcouncil.org/license/1.0.0>.
## Excuse
If anyone notifies you in writing that you have not
complied with [Notices](#notices), you can keep your
license by taking all practical steps to comply within 30
days after the notice. If you do not do so, your license
ends immediately.
## Patent
Each contributor licenses you to do everything with this
software that would otherwise infringe any patent claims
they can license or become able to license.
## Reliability
No contributor can revoke this license.
## No Liability
***As far as the law allows, this software comes as is,
without any warranty or condition, and no contributor
will be liable to anyone for any damages related to this
software or this license, under any kind of legal claim.***
(5) BSD-2-Clause
Copyright (c) <year> <owner>
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
(6) BSD-3-Clause
Copyright (c) <year> <owner>.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
(7) BSD-3-Clause
Copyright (c) <year> <owner>.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
(8) TQ ORYX End User License Agreement (EULA)
This End User License Agreement (EULA) describes your rights, obligations, and the conditions upon which you may use the ORYX software.
You should review the entire agreement, including any supplemental license terms that accompany the software and any linked terms, because all of the terms are important and together create this agreement that applies to you.
By accepting this End User License Agreement or using the software, you agree to all of these terms described below. If you do not accept and comply with these terms, you may not use the ORYX software or its features in combination with the Product (Metering and Sensor Unit Family).
When using the Product (Metering and Sensor Unit Family), you (the End User) is deemed to have agreed to the terms and conditions of this EULA.
This EULA is based on the „C234LIC651_v4_ORYX_Software_License_Agreement_TQ_SYSTEMS_STM32H573“ concluded between ORYX Embedded SARL and TQ-Systems GmbH (hereinafter referred to as „ORYX SLA“) and takes into account defined obligations from this license agreement within the scope of product use by you.
1. General
The ORYX software is classified as product-specific software and bound to the use with the Product (Metering and Sensor Unit Family).
2. Scope of Use; Restrictions
a) The ORYX software is the sole property of ORYX Embedded SARL. The ORYX software is copyrighted work and is protected by copyright law. ORYX Embeddded SARL reserves the right to transfer all or part of its interests in any rights to the ORYX software.
b) You may not modify, reverse engineer, translate or distribute the ORYX software in any format to third parties.
c) The ORYX Software may not be used by you to make software products that make it possible for third parties to use the ORYX Software on their platforms. Furthermore the ORYX Software may not be used by you as the basis of your own software products of a similar nature that may then be offered for sale or license. In particular, it is not permitted for you and third parties to use the software in your or their products or in product families other than the Product (Metering and Sensor Unit Family including the STM32H573 microcontroller unit).
d) Except as expressly and unambiguously permitted by this EULA you may not, nor permit anyone else to, directly or indirectly (i) use the Product and the ORYX software or any component thereof, except as provided in accordance with this EULA, (ii) dismantle, decompose or modify, reverse engineer, decompile, translate, disassemble or otherwise attempt to discover the structure, sequence and organization of the Product, the ORYX software or any portion thereof, or (iii) copy, modify or distribute copies of the ORYX software embedded in the Product.
e) Without derogating from the foregoing, you must maintain all copyright and any other notices on the Product, the ORYX software and documentation, including without limitation any terms and conditions of use applicable to you.
3. Warranty; Liability; Limited Warranty and Warranty Disclaimers
a) If you use the software beyond these EULA terms, all warranty and liability claims are void to the maximum extent permitted by law.
b) EXCEPT AS EXPLICITLY SET FORTH IN THESE EULA TERMS, THE ORYX SOFTWARE IS PROVIDED “AS IS”. ORYX DOES NOT WARRANT THAT THE ORYX SOFTWARE IS ERROR-FREE OR UNINTERRUPTED OR MEETS PARTICULAR GOVERNMENT AGENCY REGULATIONS, AND DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, PERFORMANCE, ACCURACY, RELIABILITY AND NON-INFRINGEMENT. ORYX DOES NOT MAKE AND THESE EULA TERMS DO NOT PASS TO YOU IN ANY WAY ANY REPRESENTATION, WARRANTY OR UNDERTAKING ON BEHALF OF ORYX’S SUPPLIERS OR LICENSORS. THE ABOVE DISCLAIMERS OF WARRANTY CONSTITUTE AN ESSENTIAL PART OF THESE EULA TERMS.
c) LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, INCLUDING, BUT NOT LIMITED TO, TORT, CONTRACT, NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR OTHERWISE, SHALL ORYX OR ITS SUPPLIERS OR LICENSORS BE LIABLE FOR DEATH, PERSONAL INJURY OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL OR EXEMPLARY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOST PROFITS, LOSS OF GOODWILL, WORK STOPPAGE, ACCURACY OF RESULTS, COMPUTER OR TRANSMISSION FAILURE, MALFUNCTION, FIRE, ELECTRICAL FAILURE OR SHORT CIRCUIT), OR DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCT OR THE ORYX SOFTWARE, OR FOR ANY COSTS OF PROCUREMENT OF SUBSTITUTE PRODUCTS BY YOU, WHETHER OR NOT ORYX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGES. THE ABOVE EXCLUSION INCLUDES ANY LIABILITY THAT MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST YOU. ORYX SHALL HAVE NO LIABILITY WHATSOEVER FOR ANY USE MADE OF THE PRODUCT OR THE ORYX SOFTWARE BY YOUR CUSTOMERS OR ANY THIRD PARTY.
4. Additional conditions
Copies of the software must contain a literal copy of this EULA.
(9) TQ ORYX End User License Agreement (EULA)
This End User License Agreement (EULA) describes your rights, obligations, and the conditions upon which you may use the ORYX software.
You should review the entire agreement, including any supplemental license terms that accompany the software and any linked terms, because all of the terms are important and together create this agreement that applies to you.
By accepting this End User License Agreement or using the software, you agree to all of these terms described below. If you do not accept and comply with these terms, you may not use the ORYX software or its features in combination with the Product (Metering and Sensor Unit Family).
When using the Product (Metering and Sensor Unit Family), you (the End User) is deemed to have agreed to the terms and conditions of this EULA.
This EULA is based on the „C234LIC651_v4_ORYX_Software_License_Agreement_TQ_SYSTEMS_STM32H573“ concluded between ORYX Embedded SARL and TQ-Systems GmbH (hereinafter referred to as „ORYX SLA“) and takes into account defined obligations from this license agreement within the scope of product use by you.
1. General
The ORYX software is classified as product-specific software and bound to the use with the Product (Metering and Sensor Unit Family).
2. Scope of Use; Restrictions
a) The ORYX software is the sole property of ORYX Embedded SARL. The ORYX software is copyrighted work and is protected by copyright law. ORYX Embeddded SARL reserves the right to transfer all or part of its interests in any rights to the ORYX software.
b) You may not modify, reverse engineer, translate or distribute the ORYX software in any format to third parties.
c) The ORYX Software may not be used by you to make software products that make it possible for third parties to use the ORYX Software on their platforms. Furthermore the ORYX Software may not be used by you as the basis of your own software products of a similar nature that may then be offered for sale or license. In particular, it is not permitted for you and third parties to use the software in your or their products or in product families other than the Product (Metering and Sensor Unit Family including the STM32H573 microcontroller unit).
d) Except as expressly and unambiguously permitted by this EULA you may not, nor permit anyone else to, directly or indirectly (i) use the Product and the ORYX software or any component thereof, except as provided in accordance with this EULA, (ii) dismantle, decompose or modify, reverse engineer, decompile, translate, disassemble or otherwise attempt to discover the structure, sequence and organization of the Product, the ORYX software or any portion thereof, or (iii) copy, modify or distribute copies of the ORYX software embedded in the Product.
e) Without derogating from the foregoing, you must maintain all copyright and any other notices on the Product, the ORYX software and documentation, including without limitation any terms and conditions of use applicable to you.
3. Warranty; Liability; Limited Warranty and Warranty Disclaimers
a) If you use the software beyond these EULA terms, all warranty and liability claims are void to the maximum extent permitted by law.
b) EXCEPT AS EXPLICITLY SET FORTH IN THESE EULA TERMS, THE ORYX SOFTWARE IS PROVIDED “AS IS”. ORYX DOES NOT WARRANT THAT THE ORYX SOFTWARE IS ERROR-FREE OR UNINTERRUPTED OR MEETS PARTICULAR GOVERNMENT AGENCY REGULATIONS, AND DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, PERFORMANCE, ACCURACY, RELIABILITY AND NON-INFRINGEMENT. ORYX DOES NOT MAKE AND THESE EULA TERMS DO NOT PASS TO YOU IN ANY WAY ANY REPRESENTATION, WARRANTY OR UNDERTAKING ON BEHALF OF ORYX’S SUPPLIERS OR LICENSORS. THE ABOVE DISCLAIMERS OF WARRANTY CONSTITUTE AN ESSENTIAL PART OF THESE EULA TERMS.
c) LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, INCLUDING, BUT NOT LIMITED TO, TORT, CONTRACT, NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR OTHERWISE, SHALL ORYX OR ITS SUPPLIERS OR LICENSORS BE LIABLE FOR DEATH, PERSONAL INJURY OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL OR EXEMPLARY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOST PROFITS, LOSS OF GOODWILL, WORK STOPPAGE, ACCURACY OF RESULTS, COMPUTER OR TRANSMISSION FAILURE, MALFUNCTION, FIRE, ELECTRICAL FAILURE OR SHORT CIRCUIT), OR DAMAGES ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCT OR THE ORYX SOFTWARE, OR FOR ANY COSTS OF PROCUREMENT OF SUBSTITUTE PRODUCTS BY YOU, WHETHER OR NOT ORYX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS OR DAMAGES. THE ABOVE EXCLUSION INCLUDES ANY LIABILITY THAT MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST YOU. ORYX SHALL HAVE NO LIABILITY WHATSOEVER FOR ANY USE MADE OF THE PRODUCT OR THE ORYX SOFTWARE BY YOUR CUSTOMERS OR ANY THIRD PARTY.
4. Additional conditions
Copies of the software must contain a literal copy of this EULA.
(10) CC0-1.0
Creative Commons Legal Code
CC0 1.0 Universal
CREATIVE COMMONS CORPORATION IS NOT A LAW FIRM AND DOES NOT PROVIDE
LEGAL SERVICES. DISTRIBUTION OF THIS DOCUMENT DOES NOT CREATE AN
ATTORNEY-CLIENT RELATIONSHIP. CREATIVE COMMONS PROVIDES THIS
INFORMATION ON AN "AS-IS" BASIS. CREATIVE COMMONS MAKES NO WARRANTIES
REGARDING THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS
PROVIDED HEREUNDER, AND DISCLAIMS LIABILITY FOR DAMAGES RESULTING FROM
THE USE OF THIS DOCUMENT OR THE INFORMATION OR WORKS PROVIDED
HEREUNDER.
Statement of Purpose
The laws of most jurisdictions throughout the world automatically confer
exclusive Copyright and Related Rights (defined below) upon the creator
and subsequent owner(s) (each and all, an "owner") of an original work of
authorship and/or a database (each, a "Work").
Certain owners wish to permanently relinquish those rights to a Work for
the purpose of contributing to a commons of creative, cultural and
scientific works ("Commons") that the public can reliably and without fear
of later claims of infringement build upon, modify, incorporate in other
works, reuse and redistribute as freely as possible in any form whatsoever
and for any purposes, including without limitation commercial purposes.
These owners may contribute to the Commons to promote the ideal of a free
culture and the further production of creative, cultural and scientific
works, or to gain reputation or greater distribution for their Work in
part through the use and efforts of others.
For these and/or other purposes and motivations, and without any
expectation of additional consideration or compensation, the person
associating CC0 with a Work (the "Affirmer"), to the extent that he or she
is an owner of Copyright and Related Rights in the Work, voluntarily
elects to apply CC0 to the Work and publicly distribute the Work under its
terms, with knowledge of his or her Copyright and Related Rights in the
Work and the meaning and intended legal effect of CC0 on those rights.
1. Copyright and Related Rights. A Work made available under CC0 may be
protected by copyright and related or neighboring rights ("Copyright and
Related Rights"). Copyright and Related Rights include, but are not
limited to, the following:
i. the right to reproduce, adapt, distribute, perform, display,
communicate, and translate a Work;
ii. moral rights retained by the original author(s) and/or performer(s);
iii. publicity and privacy rights pertaining to a person's image or
likeness depicted in a Work;
iv. rights protecting against unfair competition in regards to a Work,
subject to the limitations in paragraph 4(a), below;
v. rights protecting the extraction, dissemination, use and reuse of data
in a Work;
vi. database rights (such as those arising under Directive 96/9/EC of the
European Parliament and of the Council of 11 March 1996 on the legal
protection of databases, and under any national implementation
thereof, including any amended or successor version of such
directive); and
vii. other similar, equivalent or corresponding rights throughout the
world based on applicable law or treaty, and any national
implementations thereof.
2. Waiver. To the greatest extent permitted by, but not in contravention
of, applicable law, Affirmer hereby overtly, fully, permanently,
irrevocably and unconditionally waives, abandons, and surrenders all of
Affirmer's Copyright and Related Rights and associated claims and causes
of action, whether now known or unknown (including existing as well as
future claims and causes of action), in the Work (i) in all territories
worldwide, (ii) for the maximum duration provided by applicable law or
treaty (including future time extensions), (iii) in any current or future
medium and for any number of copies, and (iv) for any purpose whatsoever,
including without limitation commercial, advertising or promotional
purposes (the "Waiver"). Affirmer makes the Waiver for the benefit of each
member of the public at large and to the detriment of Affirmer's heirs and
successors, fully intending that such Waiver shall not be subject to
revocation, rescission, cancellation, termination, or any other legal or
equitable action to disrupt the quiet enjoyment of the Work by the public
as contemplated by Affirmer's express Statement of Purpose.
3. Public License Fallback. Should any part of the Waiver for any reason
be judged legally invalid or ineffective under applicable law, then the
Waiver shall be preserved to the maximum extent permitted taking into
account Affirmer's express Statement of Purpose. In addition, to the
extent the Waiver is so judged Affirmer hereby grants to each affected
person a royalty-free, non transferable, non sublicensable, non exclusive,
irrevocable and unconditional license to exercise Affirmer's Copyright and
Related Rights in the Work (i) in all territories worldwide, (ii) for the
maximum duration provided by applicable law or treaty (including future
time extensions), (iii) in any current or future medium and for any number
of copies, and (iv) for any purpose whatsoever, including without
limitation commercial, advertising or promotional purposes (the
"License"). The License shall be deemed effective as of the date CC0 was
applied by Affirmer to the Work. Should any part of the License for any
reason be judged legally invalid or ineffective under applicable law, such
partial invalidity or ineffectiveness shall not invalidate the remainder
of the License, and in such case Affirmer hereby affirms that he or she
will not (i) exercise any of his or her remaining Copyright and Related
Rights in the Work or (ii) assert any associated claims and causes of
action with respect to the Work, in either case contrary to Affirmer's
express Statement of Purpose.
4. Limitations and Disclaimers.
a. No trademark or patent rights held by Affirmer are waived, abandoned,
surrendered, licensed or otherwise affected by this document.
b. Affirmer offers the Work as-is and makes no representations or
warranties of any kind concerning the Work, express, implied,
statutory or otherwise, including without limitation warranties of
title, merchantability, fitness for a particular purpose, non
infringement, or the absence of latent or other defects, accuracy, or
the present or absence of errors, whether or not discoverable, all to
the greatest extent permissible under applicable law.
c. Affirmer disclaims responsibility for clearing rights of other persons
that may apply to the Work or any use thereof, including without
limitation any person's Copyright and Related Rights in the Work.
Further, Affirmer disclaims responsibility for obtaining any necessary
consents, permissions or other rights required for any use of the
Work.
d. Affirmer understands and acknowledges that Creative Commons is not a
party to this document and has no duty or obligation with respect to
this CC0 or use of the Work.
(11) ISC
ISC License:
Copyright (c) 2004-2010 by Internet Systems Consortium, Inc. ("ISC")
Copyright (c) 1995-2003 by Internet Software Consortium
Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
(12) ISC-Style
Permission to use, copy, modify, and distribute this software for any
purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
(13) MIT
MIT License
Copyright (c) <year> <copyright holders>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
(14) MIT
MIT License
Copyright (c) <year> <copyright holders>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
(15) MIT
MIT License
Copyright (c) <year> <copyright holders>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
(16) Silergy & TQ LA 2022-01-27
Silergy hereby confirms that it grants TQ the following rights of use and distribution of the software components received from Silergy:
1. Use in source form, with or without modification, are permitted provided that the following conditions are met:
a. The Licensed Software may not be redistributed in source form to any third party
b. It is not permitted to obscure or remove any product identification, copyright or other notices in the Licensed Software.
2. Redistribution and use in binary form, with or without modification, are permitted provided that the following conditions are met:
a. Redistributions must reproduce the Silergy copyright notice in the documentation and/or other materials provided with the distribution.
b. The name of Silergy may not be used to endorse or promote products derived from this software without specific prior written permission.
c. The Licensed Software may not be used with any integrated circuit products other than those designed and manufactured by Silergy (e.g. MAXQ30 SoC).
In particular, but not limited thereto, the aforementioned rights of use and distribution are granted for files under Silergy copyright.
(17) ST Micro SLA0044v5
SLA0044 Rev5/February 2018
BY INSTALLING COPYING, DOWNLOADING, ACCESSING OR OTHERWISE USING THIS SOFTWARE OR ANY PART THEREOF (AND THE RELATED DOCUMENTATION) FROM STMICROELECTRONICS INTERNATIONAL N.V, SWISS BRANCH AND/OR ITS AFFILIATED COMPANIES (STMICROELECTRONICS), THE RECIPIENT, ON BEHALF OF HIMSELF OR HERSELF, OR ON BEHALF OF ANY ENTITY BY WHICH SUCH RECIPIENT IS EMPLOYED AND/OR ENGAGED AGREES TO BE BOUND BY THIS SOFTWARE LICENSE AGREEMENT.
Under STMicroelectronics’ intellectual property rights, the redistribution, reproduction and use in source and binary forms of the software or any part thereof, with or without modification, are permitted provided that the following conditions are met:
1. Redistribution of source code (modified or not) must retain any copyright notice, this list of conditions and the disclaimer set forth below as items 10 and 11.
2. Redistributions in binary form, except as embedded into microcontroller or microprocessor device manufactured by or for STMicroelectronics or a software update for such device, must reproduce any copyright notice provided with the binary code, this list of conditions, and the disclaimer set forth below as items 10 and 11, in documentation and/or other materials provided with the distribution.
3. Neither the name of STMicroelectronics nor the names of other contributors to this software may be used to endorse or promote products derived from this software or part thereof without specific written permission.
4. This software or any part thereof, including modifications and/or derivative works of this software, must be used and execute solely and exclusively on or in combination with a microcontroller or microprocessor device manufactured by or for STMicroelectronics.
5. No use, reproduction or redistribution of this software partially or totally may be done in any manner that would subject this software to any Open Source Terms. “Open Source Terms” shall mean any open source license which requires as part of distribution of software that the source code of such software is distributed therewith or otherwise made available, or open source license that substantially complies with the Open Source definition specified at www.opensource.org and any other comparable open source license such as for example GNU General Public License (GPL), Eclipse Public License (EPL), Apache Software License, BSD license or MIT license.
6. STMicroelectronics has no obligation to provide any maintenance, support or updates for the software.
7. The software is and will remain the exclusive property of STMicroelectronics and its licensors. The recipient will not take any action that jeopardizes STMicroelectronics and its licensors' proprietary rights or acquire any rights in the software, except the limited rights specified hereunder.
8. The recipient shall comply with all applicable laws and regulations affecting the use of the software or any part thereof including any applicable export control law or regulation.
9. Redistribution and use of this software or any part thereof other than as permitted under this license is void and will automatically terminate your rights under this license.
10. THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS, WHICH ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
11. EXCEPT AS EXPRESSLY PERMITTED HEREUNDER, NO LICENSE OR OTHER RIGHTS, WHETHER EXPRESS OR IMPLIED, ARE GRANTED UNDER ANY PATENT OR OTHER INTELLECTUAL PROPERTY RIGHTS OF STMICROELECTRONICS OR ANY THIRD PARTY.
(18) ST Micro SLA0044v5
SLA0044 Rev5/February 2018
BY INSTALLING COPYING, DOWNLOADING, ACCESSING OR OTHERWISE USING THIS SOFTWARE OR ANY PART THEREOF (AND THE RELATED DOCUMENTATION) FROM STMICROELECTRONICS INTERNATIONAL N.V, SWISS BRANCH AND/OR ITS AFFILIATED COMPANIES (STMICROELECTRONICS), THE RECIPIENT, ON BEHALF OF HIMSELF OR HERSELF, OR ON BEHALF OF ANY ENTITY BY WHICH SUCH RECIPIENT IS EMPLOYED AND/OR ENGAGED AGREES TO BE BOUND BY THIS SOFTWARE LICENSE AGREEMENT.
Under STMicroelectronics’ intellectual property rights, the redistribution, reproduction and use in source and binary forms of the software or any part thereof, with or without modification, are permitted provided that the following conditions are met:
1. Redistribution of source code (modified or not) must retain any copyright notice, this list of conditions and the disclaimer set forth below as items 10 and 11.
2. Redistributions in binary form, except as embedded into microcontroller or microprocessor device manufactured by or for STMicroelectronics or a software update for such device, must reproduce any copyright notice provided with the binary code, this list of conditions, and the disclaimer set forth below as items 10 and 11, in documentation and/or other materials provided with the distribution.
3. Neither the name of STMicroelectronics nor the names of other contributors to this software may be used to endorse or promote products derived from this software or part thereof without specific written permission.
4. This software or any part thereof, including modifications and/or derivative works of this software, must be used and execute solely and exclusively on or in combination with a microcontroller or microprocessor device manufactured by or for STMicroelectronics.
5. No use, reproduction or redistribution of this software partially or totally may be done in any manner that would subject this software to any Open Source Terms. “Open Source Terms” shall mean any open source license which requires as part of distribution of software that the source code of such software is distributed therewith or otherwise made available, or open source license that substantially complies with the Open Source definition specified at www.opensource.org and any other comparable open source license such as for example GNU General Public License (GPL), Eclipse Public License (EPL), Apache Software License, BSD license or MIT license.
6. STMicroelectronics has no obligation to provide any maintenance, support or updates for the software.
7. The software is and will remain the exclusive property of STMicroelectronics and its licensors. The recipient will not take any action that jeopardizes STMicroelectronics and its licensors' proprietary rights or acquire any rights in the software, except the limited rights specified hereunder.
8. The recipient shall comply with all applicable laws and regulations affecting the use of the software or any part thereof including any applicable export control law or regulation.
9. Redistribution and use of this software or any part thereof other than as permitted under this license is void and will automatically terminate your rights under this license.
10. THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS, WHICH ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
11. EXCEPT AS EXPRESSLY PERMITTED HEREUNDER, NO LICENSE OR OTHER RIGHTS, WHETHER EXPRESS OR IMPLIED, ARE GRANTED UNDER ANY PATENT OR OTHER INTELLECTUAL PROPERTY RIGHTS OF STMICROELECTRONICS OR ANY THIRD PARTY.
(19) TQSSLAv1.0.4
TQ-Systems Software License Agreement Version 1.0.4
Copyright (c) 2018-2024 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany.
All rights reserved.
It is permitted to copy and distribute this document true to word.
The software is classified as product-specific software and bound
to the use with TQ-Systems GmbH hardware (product).
The software is provided exclusively in machine-readable
form (binary or object code).
§1 Scope of Use and Usage Period
1. The rights to the TQ-Systems GmbH (TQ) software - in particular the
copyright and additional industrial property rights - shall remain
exclusively with TQ even if the software has been modified by you or your
company.
You are prohibited from using this Software in any way other than
as described in the following provisions of this Agreement.
2. The ordinary, non-exclusive right to use the Software shall only apply in
direct connection with the product.
Product means that the hardware has been produced by TQ or a
company affiliated with TQ and that the software has been developed
specifically for that hardware.
You are prohibited from using the software developed by us on
products from third parties.
Any transfer to third parties is bound by the provisions of this Agreement.
3. You may not modify, reverse engineer or translate the Software.
To the extent that our software uses third party software components as a
work and the license terms applicable to those third party software
components conflict with the previous point of this subsection, the
following applies to them.
For the third party software components, we grant you the right to obtain
permission to modify our software in binary form solely for your own use
and to perform reverse engineering to debug those modifications.
You may not distribute the modified version to any third party in any
format.
4. Any use of the software that goes beyond the scope of the previous
provisions requires our written consent.
5. We reserve the right to assert claims for damages.
6. You are only entitled to sub-license the software in connection with
TQ hardware.
7. In the event of sub-licensing, you must also ensure that no
additional rights to the Software are granted to sublicensees other
than those granted to you under these License Terms.
8. If you transfer your rights to the Software to any third party, you
must destroy any untransferred copies of the Software.
§2 Warranty; Liability
1. We expressly point out that it is not possible according to the
state of the art to develop more complex software in such a way
that an error-free function is guaranteed under all application
conditions. We therefore only guarantee that the delivered software
is suitable for contractual use in accordance with the description
created or accepted by us.
2. In the event of major, significant and reproducible deviations of the
software functionality from the product description or specification, we
are entitled, at our discretion, either to refund the purchase price paid
by you or to carry out subsequent performance in the form of a new
delivery or repair of the product, within a reasonable period of time.
If, within the framework of the supplementary performance chosen by us,
we are unable to eliminate the considerable deviations in the
functionality of the software that have occurred within a reasonable
period by providing a defect-free update or upgrade of the software or to
circumvent them in such a way that you are able to use the software in
accordance with the contract, you may claim a reduction in the agreed
remuneration or withdraw from the contract. Any further claims are
excluded to the extent permitted by law.
3. We do not warrant for minor deviations in the functionality of the
software from the product description or specification.
4. The warranty period is one (1) year, unless longer periods are
required by law. It begins with the acceptance of the software by
you or - if a formal acceptance is not planned or does not take
place - at the latest two (2) weeks after delivery or actual transfer.
5. We do not warrant or assume any liability beyond the scope of use
described in paragraph 1 with respect to the proper selection,
application and use of the Software.
This applies in particular to improper use, in particular the use of
incompatible hardware or software, modifications or extensions to
the software made independently by or at your instigation, the
culpable omission of a regular data backup and other cases of
incorrect or negligent handling by you.
6. If you use the software outside these license terms, all warranty
and liability claims are void. The aforementioned warranty or
liability limitations shall not apply in cases of injury to life,
limb or health, in cases of liability falling within the scope of
the Product Liability Act, insofar as the software lacks a property
or quality expressly warranted by us or we are at fault in the form
of intent or gross negligence.
§3. Additional conditions
1. A written notice (printed or digitally) has to be provided with the
product which contains either a literal copy of this document or an
Uniform Resource Locator (URL) to a literal copy of this document or
a written EULA approved by TQ.
2. TQ may revise this License from time to time.
Each Revision is identified by a Version number.
You may either use this Software within the scope of this version
of the license or under the conditions of a later version of the
license.
If the Software does not specify a version number of this license,
you may choose any version of this license ever published by TQ.
(20) TQSSLAv1.0.4
TQ-Systems Software License Agreement Version 1.0.4
Copyright (c) 2018-2024 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany.
All rights reserved.
It is permitted to copy and distribute this document true to word.
The software is classified as product-specific software and bound
to the use with TQ-Systems GmbH hardware (product).
The software is provided exclusively in machine-readable
form (binary or object code).
§1 Scope of Use and Usage Period
1. The rights to the TQ-Systems GmbH (TQ) software - in particular the
copyright and additional industrial property rights - shall remain
exclusively with TQ even if the software has been modified by you or your
company.
You are prohibited from using this Software in any way other than
as described in the following provisions of this Agreement.
2. The ordinary, non-exclusive right to use the Software shall only apply in
direct connection with the product.
Product means that the hardware has been produced by TQ or a
company affiliated with TQ and that the software has been developed
specifically for that hardware.
You are prohibited from using the software developed by us on
products from third parties.
Any transfer to third parties is bound by the provisions of this Agreement.
3. You may not modify, reverse engineer or translate the Software.
To the extent that our software uses third party software components as a
work and the license terms applicable to those third party software
components conflict with the previous point of this subsection, the
following applies to them.
For the third party software components, we grant you the right to obtain
permission to modify our software in binary form solely for your own use
and to perform reverse engineering to debug those modifications.
You may not distribute the modified version to any third party in any
format.
4. Any use of the software that goes beyond the scope of the previous
provisions requires our written consent.
5. We reserve the right to assert claims for damages.
6. You are only entitled to sub-license the software in connection with
TQ hardware.
7. In the event of sub-licensing, you must also ensure that no
additional rights to the Software are granted to sublicensees other
than those granted to you under these License Terms.
8. If you transfer your rights to the Software to any third party, you
must destroy any untransferred copies of the Software.
§2 Warranty; Liability
1. We expressly point out that it is not possible according to the
state of the art to develop more complex software in such a way
that an error-free function is guaranteed under all application
conditions. We therefore only guarantee that the delivered software
is suitable for contractual use in accordance with the description
created or accepted by us.
2. In the event of major, significant and reproducible deviations of the
software functionality from the product description or specification, we
are entitled, at our discretion, either to refund the purchase price paid
by you or to carry out subsequent performance in the form of a new
delivery or repair of the product, within a reasonable period of time.
If, within the framework of the supplementary performance chosen by us,
we are unable to eliminate the considerable deviations in the
functionality of the software that have occurred within a reasonable
period by providing a defect-free update or upgrade of the software or to
circumvent them in such a way that you are able to use the software in
accordance with the contract, you may claim a reduction in the agreed
remuneration or withdraw from the contract. Any further claims are
excluded to the extent permitted by law.
3. We do not warrant for minor deviations in the functionality of the
software from the product description or specification.
4. The warranty period is one (1) year, unless longer periods are
required by law. It begins with the acceptance of the software by
you or - if a formal acceptance is not planned or does not take
place - at the latest two (2) weeks after delivery or actual transfer.
5. We do not warrant or assume any liability beyond the scope of use
described in paragraph 1 with respect to the proper selection,
application and use of the Software.
This applies in particular to improper use, in particular the use of
incompatible hardware or software, modifications or extensions to
the software made independently by or at your instigation, the
culpable omission of a regular data backup and other cases of
incorrect or negligent handling by you.
6. If you use the software outside these license terms, all warranty
and liability claims are void. The aforementioned warranty or
liability limitations shall not apply in cases of injury to life,
limb or health, in cases of liability falling within the scope of
the Product Liability Act, insofar as the software lacks a property
or quality expressly warranted by us or we are at fault in the form
of intent or gross negligence.
§3. Additional conditions
1. A written notice (printed or digitally) has to be provided with the
product which contains either a literal copy of this document or an
Uniform Resource Locator (URL) to a literal copy of this document or
a written EULA approved by TQ.
2. TQ may revise this License from time to time.
Each Revision is identified by a Version number.
You may either use this Software within the scope of this version
of the license or under the conditions of a later version of the
license.
If the Software does not specify a version number of this license,
you may choose any version of this license ever published by TQ.
(21) TQSSLAv1.0.4
TQ-Systems Software License Agreement Version 1.0.4
Copyright (c) 2018-2024 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany.
All rights reserved.
It is permitted to copy and distribute this document true to word.
The software is classified as product-specific software and bound
to the use with TQ-Systems GmbH hardware (product).
The software is provided exclusively in machine-readable
form (binary or object code).
§1 Scope of Use and Usage Period
1. The rights to the TQ-Systems GmbH (TQ) software - in particular the
copyright and additional industrial property rights - shall remain
exclusively with TQ even if the software has been modified by you or your
company.
You are prohibited from using this Software in any way other than
as described in the following provisions of this Agreement.
2. The ordinary, non-exclusive right to use the Software shall only apply in
direct connection with the product.
Product means that the hardware has been produced by TQ or a
company affiliated with TQ and that the software has been developed
specifically for that hardware.
You are prohibited from using the software developed by us on
products from third parties.
Any transfer to third parties is bound by the provisions of this Agreement.
3. You may not modify, reverse engineer or translate the Software.
To the extent that our software uses third party software components as a
work and the license terms applicable to those third party software
components conflict with the previous point of this subsection, the
following applies to them.
For the third party software components, we grant you the right to obtain
permission to modify our software in binary form solely for your own use
and to perform reverse engineering to debug those modifications.
You may not distribute the modified version to any third party in any
format.
4. Any use of the software that goes beyond the scope of the previous
provisions requires our written consent.
5. We reserve the right to assert claims for damages.
6. You are only entitled to sub-license the software in connection with
TQ hardware.
7. In the event of sub-licensing, you must also ensure that no
additional rights to the Software are granted to sublicensees other
than those granted to you under these License Terms.
8. If you transfer your rights to the Software to any third party, you
must destroy any untransferred copies of the Software.
§2 Warranty; Liability
1. We expressly point out that it is not possible according to the
state of the art to develop more complex software in such a way
that an error-free function is guaranteed under all application
conditions. We therefore only guarantee that the delivered software
is suitable for contractual use in accordance with the description
created or accepted by us.
2. In the event of major, significant and reproducible deviations of the
software functionality from the product description or specification, we
are entitled, at our discretion, either to refund the purchase price paid
by you or to carry out subsequent performance in the form of a new
delivery or repair of the product, within a reasonable period of time.
If, within the framework of the supplementary performance chosen by us,
we are unable to eliminate the considerable deviations in the
functionality of the software that have occurred within a reasonable
period by providing a defect-free update or upgrade of the software or to
circumvent them in such a way that you are able to use the software in
accordance with the contract, you may claim a reduction in the agreed
remuneration or withdraw from the contract. Any further claims are
excluded to the extent permitted by law.
3. We do not warrant for minor deviations in the functionality of the
software from the product description or specification.
4. The warranty period is one (1) year, unless longer periods are
required by law. It begins with the acceptance of the software by
you or - if a formal acceptance is not planned or does not take
place - at the latest two (2) weeks after delivery or actual transfer.
5. We do not warrant or assume any liability beyond the scope of use
described in paragraph 1 with respect to the proper selection,
application and use of the Software.
This applies in particular to improper use, in particular the use of
incompatible hardware or software, modifications or extensions to
the software made independently by or at your instigation, the
culpable omission of a regular data backup and other cases of
incorrect or negligent handling by you.
6. If you use the software outside these license terms, all warranty
and liability claims are void. The aforementioned warranty or
liability limitations shall not apply in cases of injury to life,
limb or health, in cases of liability falling within the scope of
the Product Liability Act, insofar as the software lacks a property
or quality expressly warranted by us or we are at fault in the form
of intent or gross negligence.
§3. Additional conditions
1. A written notice (printed or digitally) has to be provided with the
product which contains either a literal copy of this document or an
Uniform Resource Locator (URL) to a literal copy of this document or
a written EULA approved by TQ.
2. TQ may revise this License from time to time.
Each Revision is identified by a Version number.
You may either use this Software within the scope of this version
of the license or under the conditions of a later version of the
license.
If the Software does not specify a version number of this license,
you may choose any version of this license ever published by TQ.
(22) TQSSLAv1.0.4
TQ-Systems Software License Agreement Version 1.0.4
Copyright (c) 2018-2024 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany.
All rights reserved.
It is permitted to copy and distribute this document true to word.
The software is classified as product-specific software and bound
to the use with TQ-Systems GmbH hardware (product).
The software is provided exclusively in machine-readable
form (binary or object code).
§1 Scope of Use and Usage Period
1. The rights to the TQ-Systems GmbH (TQ) software - in particular the
copyright and additional industrial property rights - shall remain
exclusively with TQ even if the software has been modified by you or your
company.
You are prohibited from using this Software in any way other than
as described in the following provisions of this Agreement.
2. The ordinary, non-exclusive right to use the Software shall only apply in
direct connection with the product.
Product means that the hardware has been produced by TQ or a
company affiliated with TQ and that the software has been developed
specifically for that hardware.
You are prohibited from using the software developed by us on
products from third parties.
Any transfer to third parties is bound by the provisions of this Agreement.
3. You may not modify, reverse engineer or translate the Software.
To the extent that our software uses third party software components as a
work and the license terms applicable to those third party software
components conflict with the previous point of this subsection, the
following applies to them.
For the third party software components, we grant you the right to obtain
permission to modify our software in binary form solely for your own use
and to perform reverse engineering to debug those modifications.
You may not distribute the modified version to any third party in any
format.
4. Any use of the software that goes beyond the scope of the previous
provisions requires our written consent.
5. We reserve the right to assert claims for damages.
6. You are only entitled to sub-license the software in connection with
TQ hardware.
7. In the event of sub-licensing, you must also ensure that no
additional rights to the Software are granted to sublicensees other
than those granted to you under these License Terms.
8. If you transfer your rights to the Software to any third party, you
must destroy any untransferred copies of the Software.
§2 Warranty; Liability
1. We expressly point out that it is not possible according to the
state of the art to develop more complex software in such a way
that an error-free function is guaranteed under all application
conditions. We therefore only guarantee that the delivered software
is suitable for contractual use in accordance with the description
created or accepted by us.
2. In the event of major, significant and reproducible deviations of the
software functionality from the product description or specification, we
are entitled, at our discretion, either to refund the purchase price paid
by you or to carry out subsequent performance in the form of a new
delivery or repair of the product, within a reasonable period of time.
If, within the framework of the supplementary performance chosen by us,
we are unable to eliminate the considerable deviations in the
functionality of the software that have occurred within a reasonable
period by providing a defect-free update or upgrade of the software or to
circumvent them in such a way that you are able to use the software in
accordance with the contract, you may claim a reduction in the agreed
remuneration or withdraw from the contract. Any further claims are
excluded to the extent permitted by law.
3. We do not warrant for minor deviations in the functionality of the
software from the product description or specification.
4. The warranty period is one (1) year, unless longer periods are
required by law. It begins with the acceptance of the software by
you or - if a formal acceptance is not planned or does not take
place - at the latest two (2) weeks after delivery or actual transfer.
5. We do not warrant or assume any liability beyond the scope of use
described in paragraph 1 with respect to the proper selection,
application and use of the Software.
This applies in particular to improper use, in particular the use of
incompatible hardware or software, modifications or extensions to
the software made independently by or at your instigation, the
culpable omission of a regular data backup and other cases of
incorrect or negligent handling by you.
6. If you use the software outside these license terms, all warranty
and liability claims are void. The aforementioned warranty or
liability limitations shall not apply in cases of injury to life,
limb or health, in cases of liability falling within the scope of
the Product Liability Act, insofar as the software lacks a property
or quality expressly warranted by us or we are at fault in the form
of intent or gross negligence.
§3. Additional conditions
1. A written notice (printed or digitally) has to be provided with the
product which contains either a literal copy of this document or an
Uniform Resource Locator (URL) to a literal copy of this document or
a written EULA approved by TQ.
2. TQ may revise this License from time to time.
Each Revision is identified by a Version number.
You may either use this Software within the scope of this version
of the license or under the conditions of a later version of the
license.
If the Software does not specify a version number of this license,
you may choose any version of this license ever published by TQ.
(23) TQSSLAv1.0.4
TQ-Systems Software License Agreement Version 1.0.4
Copyright (c) 2018-2024 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany.
All rights reserved.
It is permitted to copy and distribute this document true to word.
The software is classified as product-specific software and bound
to the use with TQ-Systems GmbH hardware (product).
The software is provided exclusively in machine-readable
form (binary or object code).
§1 Scope of Use and Usage Period
1. The rights to the TQ-Systems GmbH (TQ) software - in particular the
copyright and additional industrial property rights - shall remain
exclusively with TQ even if the software has been modified by you or your
company.
You are prohibited from using this Software in any way other than
as described in the following provisions of this Agreement.
2. The ordinary, non-exclusive right to use the Software shall only apply in
direct connection with the product.
Product means that the hardware has been produced by TQ or a
company affiliated with TQ and that the software has been developed
specifically for that hardware.
You are prohibited from using the software developed by us on
products from third parties.
Any transfer to third parties is bound by the provisions of this Agreement.
3. You may not modify, reverse engineer or translate the Software.
To the extent that our software uses third party software components as a
work and the license terms applicable to those third party software
components conflict with the previous point of this subsection, the
following applies to them.
For the third party software components, we grant you the right to obtain
permission to modify our software in binary form solely for your own use
and to perform reverse engineering to debug those modifications.
You may not distribute the modified version to any third party in any
format.
4. Any use of the software that goes beyond the scope of the previous
provisions requires our written consent.
5. We reserve the right to assert claims for damages.
6. You are only entitled to sub-license the software in connection with
TQ hardware.
7. In the event of sub-licensing, you must also ensure that no
additional rights to the Software are granted to sublicensees other
than those granted to you under these License Terms.
8. If you transfer your rights to the Software to any third party, you
must destroy any untransferred copies of the Software.
§2 Warranty; Liability
1. We expressly point out that it is not possible according to the
state of the art to develop more complex software in such a way
that an error-free function is guaranteed under all application
conditions. We therefore only guarantee that the delivered software
is suitable for contractual use in accordance with the description
created or accepted by us.
2. In the event of major, significant and reproducible deviations of the
software functionality from the product description or specification, we
are entitled, at our discretion, either to refund the purchase price paid
by you or to carry out subsequent performance in the form of a new
delivery or repair of the product, within a reasonable period of time.
If, within the framework of the supplementary performance chosen by us,
we are unable to eliminate the considerable deviations in the
functionality of the software that have occurred within a reasonable
period by providing a defect-free update or upgrade of the software or to
circumvent them in such a way that you are able to use the software in
accordance with the contract, you may claim a reduction in the agreed
remuneration or withdraw from the contract. Any further claims are
excluded to the extent permitted by law.
3. We do not warrant for minor deviations in the functionality of the
software from the product description or specification.
4. The warranty period is one (1) year, unless longer periods are
required by law. It begins with the acceptance of the software by
you or - if a formal acceptance is not planned or does not take
place - at the latest two (2) weeks after delivery or actual transfer.
5. We do not warrant or assume any liability beyond the scope of use
described in paragraph 1 with respect to the proper selection,
application and use of the Software.
This applies in particular to improper use, in particular the use of
incompatible hardware or software, modifications or extensions to
the software made independently by or at your instigation, the
culpable omission of a regular data backup and other cases of
incorrect or negligent handling by you.
6. If you use the software outside these license terms, all warranty
and liability claims are void. The aforementioned warranty or
liability limitations shall not apply in cases of injury to life,
limb or health, in cases of liability falling within the scope of
the Product Liability Act, insofar as the software lacks a property
or quality expressly warranted by us or we are at fault in the form
of intent or gross negligence.
§3. Additional conditions
1. A written notice (printed or digitally) has to be provided with the
product which contains either a literal copy of this document or an
Uniform Resource Locator (URL) to a literal copy of this document or
a written EULA approved by TQ.
2. TQ may revise this License from time to time.
Each Revision is identified by a Version number.
You may either use this Software within the scope of this version
of the license or under the conditions of a later version of the
license.
If the Software does not specify a version number of this license,
you may choose any version of this license ever published by TQ.
(24) TQSSLAv1.0.4
TQ-Systems Software License Agreement Version 1.0.4
Copyright (c) 2018-2024 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany.
All rights reserved.
It is permitted to copy and distribute this document true to word.
The software is classified as product-specific software and bound
to the use with TQ-Systems GmbH hardware (product).
The software is provided exclusively in machine-readable
form (binary or object code).
§1 Scope of Use and Usage Period
1. The rights to the TQ-Systems GmbH (TQ) software - in particular the
copyright and additional industrial property rights - shall remain
exclusively with TQ even if the software has been modified by you or your
company.
You are prohibited from using this Software in any way other than
as described in the following provisions of this Agreement.
2. The ordinary, non-exclusive right to use the Software shall only apply in
direct connection with the product.
Product means that the hardware has been produced by TQ or a
company affiliated with TQ and that the software has been developed
specifically for that hardware.
You are prohibited from using the software developed by us on
products from third parties.
Any transfer to third parties is bound by the provisions of this Agreement.
3. You may not modify, reverse engineer or translate the Software.
To the extent that our software uses third party software components as a
work and the license terms applicable to those third party software
components conflict with the previous point of this subsection, the
following applies to them.
For the third party software components, we grant you the right to obtain
permission to modify our software in binary form solely for your own use
and to perform reverse engineering to debug those modifications.
You may not distribute the modified version to any third party in any
format.
4. Any use of the software that goes beyond the scope of the previous
provisions requires our written consent.
5. We reserve the right to assert claims for damages.
6. You are only entitled to sub-license the software in connection with
TQ hardware.
7. In the event of sub-licensing, you must also ensure that no
additional rights to the Software are granted to sublicensees other
than those granted to you under these License Terms.
8. If you transfer your rights to the Software to any third party, you
must destroy any untransferred copies of the Software.
§2 Warranty; Liability
1. We expressly point out that it is not possible according to the
state of the art to develop more complex software in such a way
that an error-free function is guaranteed under all application
conditions. We therefore only guarantee that the delivered software
is suitable for contractual use in accordance with the description
created or accepted by us.
2. In the event of major, significant and reproducible deviations of the
software functionality from the product description or specification, we
are entitled, at our discretion, either to refund the purchase price paid
by you or to carry out subsequent performance in the form of a new
delivery or repair of the product, within a reasonable period of time.
If, within the framework of the supplementary performance chosen by us,
we are unable to eliminate the considerable deviations in the
functionality of the software that have occurred within a reasonable
period by providing a defect-free update or upgrade of the software or to
circumvent them in such a way that you are able to use the software in
accordance with the contract, you may claim a reduction in the agreed
remuneration or withdraw from the contract. Any further claims are
excluded to the extent permitted by law.
3. We do not warrant for minor deviations in the functionality of the
software from the product description or specification.
4. The warranty period is one (1) year, unless longer periods are
required by law. It begins with the acceptance of the software by
you or - if a formal acceptance is not planned or does not take
place - at the latest two (2) weeks after delivery or actual transfer.
5. We do not warrant or assume any liability beyond the scope of use
described in paragraph 1 with respect to the proper selection,
application and use of the Software.
This applies in particular to improper use, in particular the use of
incompatible hardware or software, modifications or extensions to
the software made independently by or at your instigation, the
culpable omission of a regular data backup and other cases of
incorrect or negligent handling by you.
6. If you use the software outside these license terms, all warranty
and liability claims are void. The aforementioned warranty or
liability limitations shall not apply in cases of injury to life,
limb or health, in cases of liability falling within the scope of
the Product Liability Act, insofar as the software lacks a property
or quality expressly warranted by us or we are at fault in the form
of intent or gross negligence.
§3. Additional conditions
1. A written notice (printed or digitally) has to be provided with the
product which contains either a literal copy of this document or an
Uniform Resource Locator (URL) to a literal copy of this document or
a written EULA approved by TQ.
2. TQ may revise this License from time to time.
Each Revision is identified by a Version number.
You may either use this Software within the scope of this version
of the license or under the conditions of a later version of the
license.
If the Software does not specify a version number of this license,
you may choose any version of this license ever published by TQ.
(25) TQSSLAv1.0.4
TQ-Systems Software License Agreement Version 1.0.4
Copyright (c) 2018-2024 TQ-Systems GmbH <license@tq-group.com>, D-82229 Seefeld, Germany.
All rights reserved.
It is permitted to copy and distribute this document true to word.
The software is classified as product-specific software and bound
to the use with TQ-Systems GmbH hardware (product).
The software is provided exclusively in machine-readable
form (binary or object code).
§1 Scope of Use and Usage Period
1. The rights to the TQ-Systems GmbH (TQ) software - in particular the
copyright and additional industrial property rights - shall remain
exclusively with TQ even if the software has been modified by you or your
company.
You are prohibited from using this Software in any way other than
as described in the following provisions of this Agreement.
2. The ordinary, non-exclusive right to use the Software shall only apply in
direct connection with the product.
Product means that the hardware has been produced by TQ or a
company affiliated with TQ and that the software has been developed
specifically for that hardware.
You are prohibited from using the software developed by us on
products from third parties.
Any transfer to third parties is bound by the provisions of this Agreement.
3. You may not modify, reverse engineer or translate the Software.
To the extent that our software uses third party software components as a
work and the license terms applicable to those third party software
components conflict with the previous point of this subsection, the
following applies to them.
For the third party software components, we grant you the right to obtain
permission to modify our software in binary form solely for your own use
and to perform reverse engineering to debug those modifications.
You may not distribute the modified version to any third party in any
format.
4. Any use of the software that goes beyond the scope of the previous
provisions requires our written consent.
5. We reserve the right to assert claims for damages.
6. You are only entitled to sub-license the software in connection with
TQ hardware.
7. In the event of sub-licensing, you must also ensure that no
additional rights to the Software are granted to sublicensees other
than those granted to you under these License Terms.
8. If you transfer your rights to the Software to any third party, you
must destroy any untransferred copies of the Software.
§2 Warranty; Liability
1. We expressly point out that it is not possible according to the
state of the art to develop more complex software in such a way
that an error-free function is guaranteed under all application
conditions. We therefore only guarantee that the delivered software
is suitable for contractual use in accordance with the description
created or accepted by us.
2. In the event of major, significant and reproducible deviations of the
software functionality from the product description or specification, we
are entitled, at our discretion, either to refund the purchase price paid
by you or to carry out subsequent performance in the form of a new
delivery or repair of the product, within a reasonable period of time.
If, within the framework of the supplementary performance chosen by us,
we are unable to eliminate the considerable deviations in the
functionality of the software that have occurred within a reasonable
period by providing a defect-free update or upgrade of the software or to
circumvent them in such a way that you are able to use the software in
accordance with the contract, you may claim a reduction in the agreed
remuneration or withdraw from the contract. Any further claims are
excluded to the extent permitted by law.
3. We do not warrant for minor deviations in the functionality of the
software from the product description or specification.
4. The warranty period is one (1) year, unless longer periods are
required by law. It begins with the acceptance of the software by
you or - if a formal acceptance is not planned or does not take
place - at the latest two (2) weeks after delivery or actual transfer.
5. We do not warrant or assume any liability beyond the scope of use
described in paragraph 1 with respect to the proper selection,
application and use of the Software.
This applies in particular to improper use, in particular the use of
incompatible hardware or software, modifications or extensions to
the software made independently by or at your instigation, the
culpable omission of a regular data backup and other cases of
incorrect or negligent handling by you.
6. If you use the software outside these license terms, all warranty
and liability claims are void. The aforementioned warranty or
liability limitations shall not apply in cases of injury to life,
limb or health, in cases of liability falling within the scope of
the Product Liability Act, insofar as the software lacks a property
or quality expressly warranted by us or we are at fault in the form
of intent or gross negligence.
§3. Additional conditions
1. A written notice (printed or digitally) has to be provided with the
product which contains either a literal copy of this document or an
Uniform Resource Locator (URL) to a literal copy of this document or
a written EULA approved by TQ.
2. TQ may revise this License from time to time.
Each Revision is identified by a Version number.
You may either use this Software within the scope of this version
of the license or under the conditions of a later version of the
license.
If the Software does not specify a version number of this license,
you may choose any version of this license ever published by TQ.
Definition of Open Source Software
==================================
As used herein, the term “Open Source Software” means any software that is licensed royalty-free (i.e., fees for exercising the licensed rights are prohibited, whereas fees for reimbursement of costs incurred by licensor are generally permitted) under any license terms which allow all users to modify such software. “Open Source Software” as used here may require, as a condition of modification and/or distribution that the source code of such software be made available to all users of the software for purposes of information and modification.
Let us get started and bring your product to market successfully..
We will help you develop the solutions you need to succeed. With our know-how and commitment that has already led to hundreds of thousands of applications worldwide.
We are happy to advise you!
Do you have questions about our product solutions or a specific need?
Simply fill out the form and we will contact you with a personal consultation appointment:
