Einfach Installation dank aufsteckbarer Elektronik.
UIO100 Universal I/0 module in connection with load management.
Einfach Installation dank aufsteckbarer Elektronik.
- for connection to CUB100
- 5TE
- 8x Universal I/0 (each chanel can be parametrized individually )
- 4-20mA, 0 bis 10V, PT1000, DI, DO max. 400mA
- fast integration with ready-made software modules (Easy Connect)
EASY INSTALLATION THANKS TO PLUG-AND-PLAY ELECTRONICS
The module has two parts; the lower half is the terminal module. It
contains all the plugs you need to connect the wires and fieldbuses.
All the electronics are in the top half. This two-part construction
gives users a number of advantages. The electronics half can be
plugged into the terminal module in a subsequent, separate step.
And you don’t have to undo any wiring if you need to repair or
exchange a component.
The module has two parts; the lower half is the terminal module. It
contains all the plugs you need to connect the wires and fieldbuses.
All the electronics are in the top half. This two-part construction
gives users a number of advantages. The electronics half can be
plugged into the terminal module in a subsequent, separate step.
And you don’t have to undo any wiring if you need to repair or
exchange a component.
Initial installation in the wiring cabinet is
also more convenient, because you have more space to work with.
Electronics modules can be tested from an office space when all the
terminal modules are installed.
All terminal models are interconnected by means of the CAB bus.
Thanks to the jumpers, this takes place automatically when you
attach it to the top-hat rail. The modules can also be addressed fully
automatically; no additional configuration is required.
also more convenient, because you have more space to work with.
Electronics modules can be tested from an office space when all the
terminal modules are installed.
All terminal models are interconnected by means of the CAB bus.
Thanks to the jumpers, this takes place automatically when you
attach it to the top-hat rail. The modules can also be addressed fully
automatically; no additional configuration is required.
Operating conditions
Ambient temperature:
- 0°C...+50°C (in operation); -25°C...+60°C (storage temperature)
Elektrical data
Power supply:
- over CAB-Bus
Mechanical data
Case shape:
- REG (according to DIN 43880)
Case width:
- 6 TE
Product norms
Protection class:
- IP20
Interfaces
Digital Output:
- 4x 24 V (max. 400 mA with supply via AUX IN)
Ethernet:
- Up to 3x (2x switched, 1x direct ; 10/100 Base TX)Mbit
EnOcean:
- yes
EtherCAT:
- yes
Modbus TCP:
- yes
RS232:
- 1x RS232, max. 19200 Bit/s, flow control via XON / XOFF possible
RS485:
- 2x Half-Duplex, max. 115200 Baud
CAN:
- 1x CAN2.0B, max. 500 kBit/s, galvanically isolated, 120 Ω Termination can be switched on via microswitch