==== Changelog ====

=== 2014/01/13 - REV 0106 ===

== Buildenvironment ==
  * ptxdist-2012.07.0
  * OSELAS.Toolchain-2011.11.x (x - 1 ... 3)

== ptxdist 2012.07 ==
  * compile images into profile for Freescale MfgTool
  * added SystemCorp IEC61850 demo
  * removed TQMa53 support/patches/system files
  * add TQMa28/28L readme file
  * Upgrade stressapptest version
  * removed systemd/ptxconfigs (only TQMa53)
  * delete 28/28L TODOs
  * delete systemd ptxconfigs (only TQMa53)
  * delete amd-gpu firmware (only TQMa53)

== TQMa28/28L-AB/28L-AA ==
    * Linux version 3.10 (device tree) (3.10-tq-arm-bsp-0105)
      * Qualified pin setup
      * USB Overcurrent Protection enabled
      * Login as non-root user allowed
      * add support for MMC SETDSR command
      * add proprietary device tree option to setup e-MMC DSR
      * remove hard-code enet_clk output enable

    * U-Boot 2013.04 (new) (2013.04-tq-arm-bsp-0105)
      * Qualified pin setup
      * Boot from 5V only
      * Support e-MMC > 2GB
      * Remove 120s pause when kernel has no network cable connected
      * Command to burn MAC-Address into OCOTP fuses (otp_mxs)
      * reorder gpio setup order
      * fixed overflow issue on MAC incrementation for ETH1
      * add support for MMC SETDSR command
      * qualified setting of e-MMC drive strength register
      * propagate setting of e-MMC DSR to kernel via device tree modification
      * made enet_clk output driver selectable
      * propagate enet_clk driver selection to kernel via device tree modification

== TQMa28-fsl ==
    * Linux version 2.6.35 (2.6.35.14-tq-arm-bsp-0105)
      * reorder gpio setup order
      * Qualified pin setup
      * remove hard-code enet_clk output enable
      * check for command line option to enable internal enet_clk driver
      * check for command line option to set e-MMC drive strength register

    * U-Boot 2009.08 (2009.08-tq-arm-bsp-0105)
      * fix udelay duration
      * reorder gpio setup order
      * Qualified pin setup
      * enable reading FEC MAC address from fuses
      * add support for MMC SETDSR command
      * qualified setting of e-MMC drive strength register
      * propagate setting of e-MMC DSR to kernel via command line modification
      * made enet_clk output driver selectable
      * propagate enet_clk driver selection to kernel via command line modification

== TQMa335x ==
    * Linux version 3.2
    * U-Boot 2013.07

[REV0105 - internal testing stage]
[REV0104.5 - U-Boot 2013.04 for production, no change to REV0105]
[REV0104 skipped - internal development]

[REV0103 skipped - tag error in git repository]

2013/05/13 - REV 0102
---------------------

Buildenvironment:
	- ptxdist-2012.07.0
	- OSELAS.Toolchain-2011.11.x (x - 1 ... 3)

News
	- TQMa35:
		- Linux version 3.2.40
		- Fixes:
      - backport USB bugfixes
		- Features:
		  - allow to build TQMa35 / MBa35 for AA and AB hardware in a single project
		  - support for TQMa35 on MBa35-CA Baseboard

	- TQMa28:
		- Linux version 3.5 (device tree)
		- Fixes:
		  - bugfixing linux kernel

	- TQMa28-fsl:
		- Linux version 3.5 (device tree)
		- Fixes:
		  - bugfixing linux kernel + u-boot 

	- TQMa28L (prerelease):
		- Linux version 3.5 (device tree)
		- U-Boot 2012.10
		- Fixes:
		  - bugfixing linux kernel


2013/01/10 - REV 0101
---------------------
New:
	- ptxdist-2012.07.0
	- OSELAS.Toolchain-2011.11.x
	  -> .2, .3 usable;
	  -> .1 has known issue with zlib package

	- TQMa35:
		- Linux version 3.2.28
		- u-Boot 2010.06
		- Features:
			- allow all patchlevels of toolchain
			- switch to ptxdist 2012.07

	- TQMa28:
		- Linux version 3.5 (device tree)
		- Features:
			- switch to ptxdist 2012.07
			- allow all patchlevels of toolchain
			- remove unneeded gpios (gpio2_12, gpio2_13, gpio2_15, gpio3_5)
			- AUART3
			- MX28 RTC
			- PWM Backlight
			- LCDIF (FG0700, ETV570)
			- USB (host/otg/gadget:storage,serial)
			- MMC slotindex patch
			- MMC (as non-removable)
			- SD (removable)
			- FEC0, FEC1
			- MXS touchscreen
			- I2C
			- LM73 temp.sensor
			- 24c64 eeprom
			- Enabled module support

	- TQMa28:
		- U-Boot 2012.10
		- Features:
			- ptxdist includes imx-bootlets for 2009.08 only
			- Use TQMa28 machine id
			- AUART3
			- cmd_mmc.c: print current device name on boot
			- mxs_i2c: i2c base addr configurable
			- LM73 temp.sensor
			- I2C
			- 24c64 eeprom
			- GPIO
			- MII
			- MMC (as non-removable)
			- SD (removable)
			- FEC0, FEC1: ping/tftp/dhcp
			- USB (storage)
			- RTC (32768 Hz quartz)
			- RAM speed 196 MHz
			- Remove unneeded GPIOs
			- don't register fec0 phy power enable (gpio2_15)
			- fixed install script error
			- VDDD 1.55V and BO 1.45V


	- TQMa28:
		- Linux version 2.35.14 + fsl
		- u-Boot 2009.08 + fsl
		- Features:
			- switch to ptxdist 2012.07
			- allow all patchlevels of toolchain
			- RootFS size to 64 MiB
			- increase kernel patch level to .14
			- U-Boot: boot first image after firmware install
			- U-Boot: Use TQMa28 machine id
			- U-Boot: remove setup of unneeded pins (gpio2_15)
			- U-Boot: install rootfs larger than 96MB
			- U-Boot: (imx-bootlets) RAM speed 196 MHz
			- U-Boot: (imx-bootlets) VDDD 1.55V and BO 1.45V
			- U-Boot: fixed install script calc error
			- Kernel: enable 2nd FEC
			- Kernel: don't register mmc wp pin (gpio2_12)
			- Kernel: don't register fec0 phy power enable (gpio2_15)
			- Kernel: Use TQMa28 machine id
			- Kernel: Use Freescale 5V stability patch (and more fsl patches)
			- Kernel: Enable power on both usb ports 0 and 1
			- Kernel: Disable CPUFREQ support (due to hangs on mainline uboot)
			- Kernel: Re-enabled module support


2012/09/26 - REV 0100
---------------------
New:
	- ptxdist-2012.04.0
	- OSELAS.Toolchain-2011.11.1

	- TQMa35:
		- Linux version 3.2.28
		- u-Boot 2010.06
		- Features:
			- mx3fb display and backlight support (optional LVDS)
			- I2C controller
			- eSDHC0/1 controller
			- UART support
			- USB OtG HS Host
			- USB HS Host (via ULPI Phy)
			- I2C EEPROM access
			- I2C Master
			- I2C temperature sensor LM75 read
			- I2C RTC (DS1339) support
			- I2C PCA9554 IO-Expander support(MBa35 only)
			- SPI master
			- SPI Touchcontroller ADS7846 (MBa35 only)
			- FEC, 10/100 Mbit/s, fullduplex
			- SMC911x, 10/100 Mbit/s, fullduplex(MBa35 only)
			- FlexCAN driver

	- TQMa28:
		- Linux version 2.35.13 + fsl
		- u-Boot 2009.08 + fsl
		- Features:
			- display and backlight support
			- I2C controller
			- SD-Card / eMMC
			- UART / DUART support
			- USB Host / USB OTG Host
			- I2C EEPROM access
			- I2C temperature sensor LM75 read
			- RTC support
			- I2C PCA9554 IO-Expander support(MBa28 only)
			- SPI master
			- MXS Touchcontroller
			- Ethernet
			- CAN driver
