The COM Express mainboard MB-COME-1 in combination with a standard COM Express module forms a very compact hardware kit that can be used for a freely scalable embedded PC platform thanks to its modular design. Because of this – with uniform interfaces and mechanical dimensions – the PC system can be easily adjusted to suit the requirements of the application.
The many extension options and storage media that can be added offer a high level of flexibility and allow functionalities and performance to be extended easily, quickly and inexpensively.
Typical uses are found in embedded server applications, PC systems for automation, visualisation and monitoring and all applications that place high demands on quality, durability and long-term availability.
Based on COMSys specific housing-solutions BoxPCs and Panel-PCs are available. There are standard till extremely rugged, dust and spray proofed designs obtainable.
Use the link at the ordering information below to get more information about the different products.
Ordering information
COM Express Mainboard MB-COME-1
Mainboard for COM Express Modules (Type 2)
The COM Express mainboard is part of the Embedded Building Blocks (COMSys embedded PC platform) and could be delivered also seperately.
Use this link to get further information...
- Tested with many COM Express modules from different CPU module vendors.
- Suitable for "rapid prototyping" and also for massproduction in low, middle and high volumes.
- External Interfaces: 2x Gigabit Ethernet, 4x USB, DVI-I, RS-232, Power- Button, Reset-Button
- Internal Interfaces: CompactFlash socket, CFast socket, socket for 2,5” HDD/SSD, SATA, LVDS&HMI interface, 2x USB, System connector, IO Extension Interface, Mini PCIe socket, Riser interface for PCI/PCIe add in cards, 20-pol. ATX Power input, battery (socket version)
- Expandable with standard add in cards (PCI, PCIe, Mini PCIe)
| 
|
Use this link to get further information...
Request price information
COMKits (mainboard + module + internal memory + cooling solution)
Hardwarekits for integration into overall systems and projectspecific housings
Embedded PC Kit (completely mounted/proved) consisting of - MB-COME-1 COM Express Carrierboard
- DDR2/DDR3 internal memory
 | 
|
Use this link to get further information...
Request price information
COMBox-STD
Flexible BoxPC with long range availability
Key functionalities
- Scaleable from Intel Atom to Intel Core 2nd generation ("Sandy Bridge")
- 2,5" SSD / HDD, CompactFlash, CFast
- Expandable with standard add in cards
(1x Mini PCIe and 1x PCI oder PCIe) - Modular setup for individual configuration
- Compact architecture
- Durable through industrial design
- Long-term availabilty
| 
|
Use this link to get further information...
Request price information
COMBox-EMB
Rugged BoxPC (active cooled) with Intel Core 2nd generation CPUs
Varieties
Request price information
Many accessories are available to extend the functions of the hardware kit and for mechanical integration, providing a modular design with many different combination options, also on a system level.
- Riser cards for standard PCI and/or PCIe cards
- Housing and installation accessories
- Power units
- Storage media / Mass storage
Riser cards for standard PCI and/or PCIe cards
The following Riser cards are currently available as standard product:
RISER-COME-PCI for a standard PCI card (32 bit) below the mainboard Manufacturer: TQ Source of supply: Microtronica (Article#: 487397) | 
|
RISER-COME-PCIe for a standard PCIe card (x1) below the mainboard Manufacturer: TQ Source of supply: Microtronica (Article#: 487398) | 
|
Housing and installation accessories
Our cooperation partner apra-norm provides housings that are developed especially for the Embedded Bulding Blocks:
Embedded-PC chassis Release 1
suitable for COMKits (Release 1) with Heatspreader
(actual: COMKit-N270-STD (Release 1), COMKit-CM723-STD (Release 1)) - extremly robust, optimal heat disipation for COMSys
- all connectors on one side
- custom specific modifications on request
Datasheet: EBB Embedded-PC chassis (Release 1) (German)
Manufacturer: apra-norm
Source of supply: apra-norm (Artikel#: 205-300-00) and Microtronica (Article#: 481789) | 
|
Embedded-PC chassis Release 2 suitable for COMKits (Release 2) with Heatspreader
(actual: COMKit-N270-STD (Release 2), COMKit-CM723-STD (Release 2)) - extremly robust, optimal heat disipation for COMSys
- IP 54 class (on 5 sides), all connectors on one side
- Mounting: VESA 100 on bottom side
additional mounting options (DIN rail, wall mount,...) available - possible extensions: one standard card (PCI or PCIe)
- prepared for WLAN antenna
- custom specific modifications on request
Datasheet: EBB Embedded-PC chassis (Release 2) (German) Manufacturer: apra-norm Source of supply: apra-norm (Artikel#: 205-400-00) and Microtronica (Article#: TBD) available August 2011 | NEU
 |
For the installation of the COMKits in standard Mini-ITX housing the following assembly set is provided:
COMSet-Mini-ITX Release 1 consisting of - Standard IO shield for COMKits Release 1
- Distance bolts (M3) and screws (M3) for the 22mm stand-off inside the Mini-ITX housing
- UNC fixing bolts for Sub-D and DVI connector
Manufacturer: TQ Source of supply: Microtronica (Article#: 482201) Note: Especially when having very compact housings, the mechanical integration options have to be verified by the user, as a collision with the fixing clamps may occur (depending on the housing construction). | . |
COMSet-Mini-ITX Release 2 consisting of - Standard IO shield for COMKits Release 2
- Distance bolts (M3) and screws (M3) for the 22mm stand-off inside the Mini-ITX housing
- UNC fixing bolts for Sub-D and DVI connector
Manufacturer: TQ Source of supply: Microtronica (Article#: TBD) avaible mid of July 2011 Note: Especially when having very compact housings, the mechanical integration options have to be verified by the user, as a collision with the fixing clamps may occur (depending on the housing construction). | . |
Power units
The power supply of the COMKits corresponds to standard-ATX (20 pin), so that standard ATX power units may be used.
For a preferably compact construction and for the integration in the housings from apra-norm, that are especially developed for the Embedded Building Blocks, the following power units fit best:
picoPSU power unit series Miniatur DC/DC ATX power unit Available with different output classes and input voltages. For running on system voltages (e.g. 230V) an external AC/DC power unit is additionally required. Manufacturer: mini-box.com Source of supply: divers (examples as follows) | 
|
Type | Info | Source of supply examples |
|---|
| | mini-box.com | CARTFT.com | mini-itx.de | ddcom24.de | LogicSupply.eu |
picoPSU-80 | 80W / 12V (yellow) | Link | Link | Link | Link | Link |
picoPSU-90 | 90W / 12V (yellow) | Link | Link | Link | Link | Link |
picoPSU-120 | 120W / 12V (yellow) | Link | Link | Link | Link | Link |
picoPSU-80-WI-32 | 80W / 12-32V (red) | Link | Link | Link | Link | |
picoPSU-120-WI-25 | 120W / 12-25V (red) | Link | Link | Link | Link | Link |
M3-ATX | 125W / Kfz (blue) | Link | Link | Link | | |
M3-ATX-HV | 95W / Kfz (blue) | Link | Link | Link | Link | Link |
Please note the detailed specifications of the manufacturer (voltages, currents, installation notes). Additional bundles consisting of picoPSU power unit and AC/DC power unit are provided from divers supplier.
Notes:
For running the COMKits the 80W variant (picoPSU-80 respectively picoPSU-80-WI-32) is sufficient, unless the supply voltage is strongly loaded by additional components.
At TQ the picoPSU-80 and picoPSU-80-WI-32 variants have been employed until now.
Storage media / Mass storage
Standard mass storage (2,5" SATA HDD / 2,5" SATA SDD, CompactFlash, CFast Flash-Cards and USB-Flash-Drives) may be employed for COMKits.
All tested storage media have not shown any technical concerns until now. A compatibility list is not yet available.
For harsh environments and raised temperature requirements it is recommended to employ flash based storage media. Especially for passive cooled systems, that are set up with closed housings, flash based storage media should be used. Those storage media have definite less self-heating than hard disks (HDDs) and therefore Hot-Spots in closed housings may be avoided.
When using hard disks it should be paid attention to the fact that for applications with raised requirements regarding temperature, permanent operation, life time and reliability models are needed that are specified for "Industrial" respectively "Automotive".
Supplier in this sector are for example:
COMSys directly from the manufacturer for OEMs and industrial customers:
Standard variants and individual solutions:
TQ-Systems GmbH
Mühlstr. 2
82229 Seefeld
Germany
Phone.: +49 (0)8153-9308-0
Contact form from TQ
For Resellers and System Integrators within the Intel RCO channel:
Here you can get standard versions of Embedded Building Blocks:
Microtronica - A DIVISION OF ARROW
Max-Planck Str. 1-3
63303 Dreieich
Germany
Phone: +49 6103-3048411
Contact form of Microtronica
Web: Embedded Building Blocks on the Microtronica Website
For COMSys solutions with COM Express™ modules from Kontron:
Aaronn Electronic GmbH
Zeppelinstraße 4
82178 Puchheim
Contact person: Mr. Florian Haidn
Phone.: +49 89-45770
E-Mail: florian.haidn @aaronn.de
Web: COMSys on the Aaronn Website
deutsch
english
